摘要
结合船舶LNG燃料加注站的相关技术要求,给出实船在设计和建造过程中的相关建议。对比不同规范和第三方组织在LNG加注站总体布置、低温防护、消防措施,以及照明等方面的不同技术要求,明确在实船设计和建造过程中选择适应的第三方标准,根据不同船型和布置场景提出相关的设计建议,避免了前期方案设计过程中由于采用标准不当而造成的后续设计修改。
Combined with the relevant technical requirements of LNG fuel filling station,some relevant suggestions were proposed for ship’s design and construction.By comparing the different technical requirements of rules and third-party’s requirements concerning with overall layout,low temperature protection,firefighting and lighting of LNG filling station,how to choose the third-party specification during the design and construction was clarified,and suggestions were given based on different ship types and layout scenarios so as to avoid subsequent design’s modification due to adopting the improper standard in preliminary design.
作者
朱杰
ZHU Jie(Dalian Branch of China Classification Society, Dalian Liaoning 116001, China)
出处
《船海工程》
北大核心
2022年第S01期97-99,104,共4页
Ship & Ocean Engineering
基金
工信部项目(工信部装函[2018]473号)。
关键词
LNG双燃料动力系统
加注站
总体布置
低温防护
水幕系统
灭火系统
照明
LNG dual fuel-powered system
filling station
general arrangement
low-temperature protection
water curtain system
firefighting system
lighting
