基于SRV6技术的联通智能城域网平面智能方法选择研究

Research on Intelligent Method Selection of Unicom Intelligent Metropolitan Area Network Plane Based on SRV6 Technology

联通智能城域网平面智能方法运行效率及有效性非常重要,提出基于SRV6技术对联通智能城域网平面智能方法选择进行研究。构建联通智能城域网络架构,通过软硬件设置路由装置,对城域网分区处理,建立联通智能城域网平面方法选择模型。实验中对比四种方法的吞吐量和往返时间,SRV6技术得到的平均吞吐量为33.09 Gbps,远大于其他三种方法,该技术的平均往返时间为0.056 ms,明显小于另外三种方法,因此该方法优于其他方法,更具优越性。

The operation efficiency and effectiveness of plane intelligent method of Unicom intelligent metropolitan area network are very important.This paper proposes to study the intelligent method selection of Unicom intelligent metropolitan area network based on SRV6 technology.It constructs the intelligent metropolitan area network architecture of Unicom,sets the routing device through software and hardware,disposes divided metropolitan area network,and establishes the plane method selection model of Unicom intelligent metropolitan area network.In the experiment,the throughput and round trip time of the four methods are compared,and the average throughput obtained by SRV6 technology is 33.09 Gbps,which is much greater than the other three methods.The average round trip time of this technology is 0.056 ms,which is significantly less than that the other three methods.Therefore,this method is superior to other methods and has more advantages.