摘要
钻探施工中经常会遇到钻孔漏失,严重时会造成孔口失返的情况。当采取顶漏钻进工艺时,因孔内钻井液循环情况无法直接观察,为避免抢先钻进造成烧钻等事故,合理的冲孔工作和技术措施是保障安全施工的重要手段。在阐述顶漏钻进钻机正常辅助操作的基础上,细分孔口失返可能出现的4种情况,包括:冲孔有泵压、冲孔无泵压无稳定水位、冲孔无泵压有稳定水位、冲孔无泵压且地层易糊钻等情况,提出了相关冲孔工作注意事项和必要技术措施,供钻探施工技术人员参考。
The drilling fluid leakage often occurs in the drilling construction,even loss of returns.Reasonable punching work and technical measures are important means to ensure safe construction during the lost circulation top leakage drilling.Loss of returns may occur in 4 cases such as punching with pump pressure,punching without pump pressure and stable water level,punching with stable water level and without pump pressure and punching without pump pressure and punching in balling formation.The related matters needing attention and necessary technical measures are put forward.
作者
王志祥
郭如伦
韩庆
欧涛
WANG Zhi-xiang;GUO Ru-lun;HAN Qing;OU Tao(The 403rd Geological Team,BGEEMRSP,Emeishan,Sichuan 614200;The 6th Geological Party,Tibet Bureau of Geology and Mineral Resources,Lhasa 851400)
出处
《四川地质学报》
2022年第S01期151-154,共4页
Acta Geologica Sichuan
基金
四川省深地资源勘查开发研究院、四川省张建东钻探技能大师工作室资助项目“电动顶驱钻探装备配套及成井工艺关键技术研究”。
关键词
冲孔时间
稳定循环
烧钻
带压钻进
孔口失返
顶漏钻进
punching time
stable circulation
burning drill
drilling with pressure
loss of returns
top leakage drilling
