摘要
Bone grafting is a surgical restructuring procedure of replacing broken bones and reconstructing missing bone pieces so that complex bone fractures can be repaired to avoid any serious health risk as well as permanent bone disfiguration.Normally,human bones tend to regenerate and heal completely from fracture.But it needs a small scaffold to provide the necessary space to grow.Bone implants allow a broken bone to grow seamlessly.Traditionally,non-corrosive metal alloys are used for fixing broken bones.A metal plate is fastened between two ends of broken bones to join them.However,issues like high weight,high cost,low wear resistance,etc.led to the emergence of ceramics and ceramic-based composites in surgical engineering.Recent trends indicate the usage of organic ceramics and their associated composites as biomimeticmaterials for prostheses and other biomedical applications.This research paper deals with the fabrication of one such type of ceramic matrix composite(CMC)specimen with sea sponge and cuttlebone using powder metallurgy process by varying composition of cuttlebone,the particle size of the ceramics and sintering temperature of green compacts.Evaluation of thermo-mechanical properties and optimization of process parameters is carried out using the preferential selection index(PSI)method.The results obtained from this technique are further validated usingMulti-Level General Factorial Design(MLGFD).
