Adaptive sampling strategy for characterizing spatial distribution of soil liquefaction potential using cone penetration test

Characterizing spatial distribution of soil liquefaction potential is critical for assessing liquefactionrelated hazards(e.g.building damages caused by liquefaction-induced differential settlement).However,in engineering practice,soil liquefaction potential is usually measured at limited locations in a specific site using in situ tests,e.g.cone penetration tests(CPTs),due to the restrictions of time,cost and access to subsurface space.In these cases,liquefaction potential of soil at untested locations requires to be interpreted from limited measured data points using proper interpolation method,leading to remarkable statistical uncertainty in liquefaction assessment.This underlines an important question of how to optimize the locations of CPT soundings and determine the minimum number of CPTs for achieving a target reliability level of liquefaction assessment.To tackle this issue,this study proposes a smart sampling strategy for determining the minimum number of CPTs and their optimal locations in a selfadaptive and data-driven manner.The proposed sampling strategy leverages on information entropy and Bayesian compressive sampling(BCS).Both simulated and real CPT data are used to demonstrate the proposed method.Illustrative examples indicate that the proposed method can adaptively and sequentially select the required number and optimal locations of CPTs.