期刊文献+

多次喷射模式下共轨系统喷油量波动预测与补偿 被引量:1

Fuel Injection Quantity Fluctuation Prediction and Compensation for Multiple Injections of Common Rail System
下载PDF
导出
摘要 为了解决多次喷射模式下喷油量的精确控制问题,进行了基于波动量的预测,实现了有效的喷油补偿。首先,分析了喷油器的动态特性,并基于AMESim仿真软件建立了共轨系统喷油器仿真模型;然后,通过仿真数据分析多次喷射模式下喷油量波动的影响因素,确定了喷油压力、预喷脉宽、主喷和预喷之间的时间间隔等为主要特征参数,提出基于LM-BP模型的喷油波动量预测方法;同时,基于喷油波动量的预测结果设计喷油量补偿控制器。结果表明,基于波动量的预测可以提高喷射精度,验证了所提策略的有效性。 To solve the inaccurate injection quantity problem in multiple injections,in this paper,a simulation model of the electro injector is developed in the AMESim environment through dynamics analysis of injector,and the parameter matching and rationality verification of the model are also conducted.In addition,the influencing factors of fuel injection fluctuation are investigated.The results show that the change of injection pressure,pre-injection pulse width,the dwell time between the main and the pilot injection pulse can affect fuel fluctuation.Moreover,a fuel compensation control strategy based on self-learning system is constructed by using a certain sample of stimulation data to compensate for the deviation of multiple injection quantity.A self-learning system is realized by using the genetic algorithm(GA)and neural network,which can effectively improve injection control.
作者 刘奇芳 李东子 张亮 欣白宇 LIU Qifang;LI Dongzi;ZHANG Liang;XIN Baiyu(State Key Laboratory of Automotive Simulation andControl,Jilin University,Changchun 130022,China;Electrical and Electronics,China FAW Co.,Ltd.,Changchun 130011,China)
出处 《同济大学学报(自然科学版)》 EI CAS CSCD 北大核心 2021年第S01期70-78,共9页 Journal of Tongji University:Natural Science
基金 国家自然科学基金青年基金(61803173) 吉林省自然科学基金(20200201062JC)。
关键词 共轨系统喷油器 喷油器建模 波动量预测 喷油补偿 多次喷射 common rail system injector injectors modelling fluctuation prediction injection quantity compensation multiple injections
  • 相关文献

参考文献2

二级参考文献14

  • 1黄英,赵长禄,张付军,孙业保.车辆动力传动一体化控制对换挡过程影响的试验研究[J].汽车工程,2004,26(6):710-713. 被引量:6
  • 2Masahiko Miyaki, Hideya Fujisawa, Akira Masuda, et al. Development of New Electronically Controlled Fuel Injection System ECD-U2 for Diesel Engines[ C]. SAE Paper 910252.
  • 3Cao Carl, Shull Donn, Himes Ed. A Model-based Environment for Production Engine Management System (EMS) Development [ C ]. SAE Paper 2001 -01 -0554.
  • 4Corsetti Anthony, O'Connell Glenn. In-Vehicle Engine Torque Model Validation[ C ]. SAE Paper 2002 - 01 - 1143.
  • 5Livshiz Miehael, Kao Minghui. Validation and Calibration Proeess of Powertrain Model for Engine Torque Control Development [ C ]. SAE Paper 2004 - 01 - 0902.
  • 6余志生.汽车理论(3版)[M].北京:机械工业出版社,2002.
  • 7Mikio Kumano, Kenzo Yano, Kanehito Nakamura, et al. Advanced electronics for a clean diesel engine management system, SAE paper 2006-21-0059[R]. IS. 1. ] : SAE, 2006.
  • 8Baratta M, Catania A E, Ferrari A. Hydraulic circuit design rules to remove the dependence of the injectedfuel amount on dwell time in multijet CR systems[J]. Journal of Fluids Engineering, 2008,130(12) : 1 - 12.
  • 9Hitoshi Tornishima, Takeo Matsumoto, Mamoru Okl, et al. The advanced diesel common rail system for achieving a good balance between ecology and economy, SAE paper 2008-28-0017[R]. [S. 1. ] : SAE, 2008.
  • 10Catania A E, Ferrari A, Manno M, et al. Experimental investigation of dynamic effects on multiple-injectioncommon rail system performance[J]. ASME J Eng Gas Turbines Power, 2005,130(3) :1 - 12.

共引文献7

同被引文献17

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部