期刊文献+

平江县仁里矿区复杂地层钻探技术研究

Study on drilling technology for complex strata in Renli mining area of Pingjiang County
下载PDF
导出
摘要 针对平江县仁里矿区,钻进过程中极易出现偏斜、卡钻、缩径、垮孔,钻进效率低等问题。我们通过施工中正反两方面经验对比分析,针对上述问题开展技术研究,总结了利用优化钻孔结构、增大钻具刚性和绳索取心金刚石双扶正器钻具防斜,选用绳索取心金刚石梯齿钻头提高钻进效率,优选低固相泥浆护壁等一套适合在该地层施工的技术措施,取得了较好成效,近年来在该矿区完成钻探工作量10717.36m,39个钻孔,钻孔质量优良,该项目被评为2017年全国十大地质找矿成果之一。 For the Renli mining area in Pingjiang County,problems such as deflection,sticking,shrinkage,collapsed holes and low drilling efficiency are very likely to occur during the drilling process.Through the comparative analysis of positive and negative experience in construction,we carried out technical research on the above problems,and concluded that the use of optimized drilling structure,increased rigidity of drilling tools,and rope coring diamond double centralizer drilling tools to prevent deflection,the choice of rope coring diamond A set of technical measures suitable for construction in this stratum,such as a ladder-tooth bit to improve drilling efficiency,and a set of technical measures suitable for construction in this stratum,such as low-solid phase mud wall protection,have achieved good results.The hole quality is excellent,and the project was rated as one of the top ten geological prospecting achievements in the country in 2017.
作者 许立志 XU Li-zhi(NO.311 brigade of Hunan Nuclear Industry Geology Bureau,Yueyang 414100,China)
出处 《世界有色金属》 2022年第11期223-225,共3页 World Nonferrous Metals
关键词 复杂地层 钻孔偏斜 双扶正器钻具 钻孔结构 梯齿钻头 低固相泥浆 complex formation borehole deflection double centralizer drilling tool borehole structure ladder-tooth bit low solid phase mud
  • 相关文献

参考文献5

二级参考文献22

共引文献91

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部