期刊文献+

氢火焰离子法检测动静密封泄漏甲烷的不确定度分析

Uncertainty analysis of methane leakage in motive and static seals detected by hydrogen flame ionization method
下载PDF
导出
摘要 为了研究不确定度评定在动静密封泄漏检测质量控制中的重要作用,对氢火焰离子法检测设备动静密封泄漏甲烷的测定过程进行不确定度分析,研究影响检测结果质量的不确定度分量并进行评定,得到测量结果的扩展不确定度为U=34.0 mol/mol,k=2。不确定度分析评定结果表明,影响检测结果质量的主要因素是仪器校准操作过程,其次是校准用标准气体,再次是密封点表面泄漏值检测操作。通过对不确定度进行评定和分析,可为制定动静密封泄漏甲烷检测质量控制措施提供依据。 In order to study the important role of uncertainty assessment in the quality control of dynamic and static seal leak detection,uncertainty analysis was performed on the determination process of dynamic and static seal leak methane of the hydrogen flame ionization detection equipment,and the uncertainty components affecting the quality of the detection results were studied and assessed,and the extended uncertainty of the measurement results was obtained as U=34.0 mol/mol,k=2. The results of uncertainty analysis assessment showed that the main factor affecting the quality of the test results was the instrument calibration operation process,followed by the calibration standard gas,and then the seal point surface leakage value detection operation. The uncertainty assessment and analysis could provide a basis for the development of quality control measures for dynamic and static seal leakage methane detection.
作者 丁德武 杨静怡 董瑞 李波 王国龙 DING Dewu;YANG Jingyi;DONG Rui;LI Bo;WANG Guolong(State Key Laboratory of Safety and Control for Chemicals,SINOPEC Research Institute of Safety Engineering Co.,Ltd.,Qingdao Shandong 266100,China)
出处 《工业安全与环保》 2022年第9期22-25,共4页 Industrial Safety and Environmental Protection
关键词 质量控制 不确定度评定 氢火焰离子法 密封泄漏 甲烷 quality control uncertainty evaluation hydrogen flame ionization method seal leakage methane
  • 相关文献

参考文献3

二级参考文献10

  • 1国家质量监督检验检疫总局.JJF1059.1-2012.测量不确定度评定与表示[S].
  • 2Guide 98-1, Uncertainty of measurement Part 1 : Introduc- tion to the the expression of uncertainty in Measurement [S]. ISO/IEC, 2009.
  • 3Guide 98-3, Uncertainty of measurement Part 3 :Guide to the expression of uncertainty in Measurement (GUM: 1995) [S]. ISO/IEC, 2008.
  • 4Guide 98-4, Uncertainty of measurement Part 4: Role measurement uncertainty in conformity assessment [ S ]. ISO/IEC, 2012.
  • 5Guide 98- 3/SuppL. 1, Uncertainty of measurement Part 3/Supplement 1: Propagation of distributions using a Monte Carlo method[ S]. ISO/IEC, 2008.
  • 6Guide 98- 3/SuppL. 2, Uncertainty of measurement Part 3/Supplement 2 : Extension to any number of output quan- tities[ S]. ISO/IEC, 2011.
  • 7费业泰.现代误差理论及其基本问题-宇航计测技术[Z].
  • 8尚德军,王军.测量不确定度的研究和应用进展[Z].
  • 9林洪桦.测量不确定度评定应基于误差理论[Z].
  • 10邱钟华.测量不确定度评估的应用管理和模型化-质量与标准化[Z].

共引文献49

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部