摘要
Garnet-type solid-state electrolytes(SSEs)are a remarkable Li-ion electrolyte for the realization of next-generation all-solid-state lithium batteries due to their excellent stability against Li metal as well as high ionic conductivities at room temperature.However,garnet electrolytes always contain undesired and hardly removable Li_(2)CO_(3) contaminations that have persistently large resistance and unstable interface contact with Li metal.This is a critical bottleneck for the practical application of garnet electrolytes.Here,we design a novel strategy to completely root out Li_(2)CO_(3) both inside and on the surface of garnet.This is achieved by a so-called double replacement reaction between Li_(2)CO_(3) and SiO_(2) during one-step hot press process for garnet electrolyte densification.It leads to in-situ transformation of LixSiOy(LSO)mostly locating around the grain boundaries of garnet.Due to the higher ion conductivity and better electrochemistry stability of LSO than Li_(2)CO_(3),the modified garnet electrolyte shows much improved electrochemical performance.Moreover,the wettability between modified garnet electrolyte and lithium metals was significantly enhanced in the absence of surface Li_(2)CO_(3).As a proof of concept,an assembled Li symmetric cell with modified garnet electrolyte displays a high critical current density(CCD)of 0.7 mA cm^(-2)and a low interfacial impedance(5Ωcm^(2))at 25℃.These results indicate that the upcycling of Li_(2)CO_(3)is a promising strategy to well-address the degradation and interfacial issue associated with garnet electrolytes.
基金
financial support from the National Natural Science Foundation of China(Grant No.11804261)
National Key Research and Development Program of China(Grant No.2019YFA0704900)。