期刊文献+

响应曲面法优化绿原酸明胶微球的制备工艺研究 被引量:2

Optimization of process of chlorogenic acid gelatin microspheres by response surface methodology
下载PDF
导出
摘要 本文以明胶为载体材料,绿原酸作为模型药物,采用乳化-化学交联法制备绿原酸微球。以产率、包封率、平均粒径为评价指标,通过响应曲面法优化制备工艺。得到的最佳制备工艺为:明胶浓度为0.23g·mL^(-1)、水油体积比为1∶5.6(mL∶mL)、搅拌速度为1220r·min^(-1)。该条件下制备的微球表面光滑圆整,大小均匀,分散性好,平均粒径为36μm,产率为99.5%。通过紫外分光光度法测得包封率为89.5%。说明该方法制备的绿原酸微球稳定性好、工艺简单、产率高,具有良好的应用前景和推广价值。 Using gelatin as carrier material and chlorogenic acid as model drug,chlorogenic acid microspheres were prepared by emulsification-chemical cross-linking method.Taking yield,encapsulation efficiency and average particle size as evaluation indicators,the preparation process was optimized by response surface method.The best preparation process was obtained as follows:the gelatin concentration was 0.23g·mL^(-1),the water-oil volume ratio was 1∶5.6(mL∶mL),and the stirring speed was 1220r·min^(-1).The microspheres prepared under these conditions were smooth and round in surface,uniform in size and good in dispersibility,with an average particle size of 36μm and a yield of 99.5%.The encapsulation efficiency was determined to be 89.5%by UV spectrophotometry.It showed that the chlorogenic acid microspheres prepared by this method have good stability,simple process and high yield,and have good application prospects and promotion value.
作者 费文玲 陈庆庆 秦兰 杨宽 秦蓓 FEI Wen-ling;CHEN Qing-qing;QIN Lan;YANG Kuan;QIN Bei(College of Pharmaceutical,Xi'an Medical University,Institute of Medicine,Xi'an 710021,China;School of Pharmacy,Chengdu Medical College,Chengdu 610500,China)
出处 《化学工程师》 CAS 2022年第9期1-5,共5页 Chemical Engineer
基金 陕西省重点研发计划项目(2021ZDLSF03-05) 教育部产学合作协同育人项目(No.202101021043) 陕西省教育厅科研计划项目资助(21JK0901) 陕西省科技厅自然科学基础研究计划项目(2022JM-492) 陕西省大学生创新创业训练计划项目(S202111840030) 西安医学院校级科技创新团队(2021TD07) 西安医学院校级重点药学学科(西医发[2019]96号)。
关键词 绿原酸 明胶微球 响应曲面法 制备工艺 chlorogenic acid gelatin microspheres response surface methodology process
  • 相关文献

参考文献15

二级参考文献180

共引文献340

同被引文献34

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部