期刊文献+

Effects of process parameters on the growth behavior and granule size distribution of iron ore mixtures in a novel high-shear granulator

下载PDF
导出
摘要 This work proposes a novel horizontal high-shear granulator for iron ore granulation before sintering process.The granulation behavior such as growth process and structure of granules were firstly analyzed,followed by the effects of operation conditions such as water content,initial particle size distribution,and the concentrate ratio.The results show that the granule size increased significantly with increasing the granulation time,and the structure of granule can be divided into three types:non-nuclei,single-nuclei,and multi-nuclei.Water promotes the coalescence and growth of particles,and a better granulation performance was obtained at the water content of 8.8wt%under the current raw material conditions.Increasing the nuclei particle ratio led to an increase in average size of granules and permeability of the granules bed,but a decrease in growth index.Besides,with increasing of concentrate ratio,granulation performance such as granule size,bed permeability,and uniformity became worse.
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2022年第12期2152-2161,共10页 矿物冶金与材料学报(英文版)
基金 financially supported by the National Natural Science Foundation of China (Nos. 51974048 and 52004046) the China Postdoctoral Science Foundation (Nos. 2021T140783 and 2020M673131) the Postdoctoral Science Foundation of Chongqing (No. cstc2020jcyj-bsh X 0030)
  • 相关文献

参考文献6

二级参考文献48

  • 1黄柱成,韩志国,周节旺,姜涛,杨熙鹏.MgO对以细磁铁精矿为主的烧结矿微观结构的影响[J].钢铁,2005,40(9):16-20. 被引量:18
  • 2YING Zi-wei JIANG Mao-fa XU Li-xian.Effects of Mineral Composition and Microstructure on Crack Resistance of Sintered Ore[J].Journal of Iron and Steel Research(International),2006,13(4):9-12. 被引量:1
  • 3Kruyer, S. (1958).The penetration of mercury and capillary condensation in packed spheres. Transactions of The Farady Society, 54, 1758-1767.
  • 4Lian, G., Thornton, C., & Adams, M.J. (1993).A theoretical study of the liquid bridge forces between two rigid spherical bodies.Journal of Colloidal and Interface Science, 161,138-147.
  • 5Mehrotra, V. P., & Sastry, K. V. S. (1980), Pendular bond strength between unequal- sized spherical particles. Powder Technology, 25, 203-214.
  • 6Melrose, J. C. (1966). Model calculations for capillary condensation. AIChE Journal, 12, 986-994.
  • 7Melrose, J. C., & Wallick, G. C. (1967). Exact geometrical parameters for pendular ring fluid. The Journal of Physical Chemistry, 71, 36?6-3677.
  • 8Orr, F. M., Scriven, L. E., & Rivas, A. P. (1975). Pendular rings between solids-meniscus properties and capillary force.Journal of Fluid Mechanics, 67, 723-742.
  • 9Pepin, X., Rossetti, D., Iveson, S. M., & Simons, S. J. R. (2000). Modeling the evolu- tion and rupture of pendular liquid bridges in the presence of large wetting hysteresis.Journal of Colloidal and Interface Science, 232, 289-297.
  • 10Pierrat, P., & Caram, H. S. (1997). Tensile strength of wet granular materials. Powder Technology, 91, 83-93.

共引文献29

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部