期刊文献+

基于多失效模式的海上浮式风电机组结构可靠性研究 被引量:2

MULTI-MODE RELIABILITY ANALYSIS ON STRUCTURAL OF OFFSHORE FLOATING WIND TURBINE
下载PDF
导出
摘要 为准确评估浮式海上风电机组结构服役安全性,提出一种基于多失效模式的可靠性评估方法。以美国国家可再生能源实验室(NREL)研制的5 MW浮式风力发电机组OC3 Hywind为目标模型,根据不同海况下浮式风电机组结构耦合动力响应分析结果,分析关键结构的不同失效模式,最后基于多失效模式的可靠性评估方法计算整体系统可靠性。结果表明,考虑串联系统,基于多失效模式可靠性分析方法得到的海上浮式风电机组结构整体的失效概率远高于单一模式失效概率,采用此方式评估结构可靠度更加安全准确。 To ensure the safety of offshore floating wind turbine system,a novel the liability assessment method based on comprehensive multi-failure modes is proposed in this paper. The OC3 floating spar(Hywind)with 5 MW baseline wind turbine developed by American National Renewable Energy Laboratory(NREL)is applied as the target model. The coupled dynamic responses of OC3-Hywind are simulated under various sea states. And the reliabilities of several critical members under both ultimate strength failure and fatigue failure modes are calculated respectively. Then,the multi-mode reliability assessment is applied to calculate the structural reliability. The results demonstrate that the failure probability of the offshore floating wind turbine by the multi-mode reliability assessment is greater than that of any single mode. It is more efficient and accurate to estimate the structural reliability by this method.
作者 石嫄嫄 和庆冬 吴衍剑 杜君峰 张敏 Shi Yuanyuan;He Qingdong;Wu Yanjian;Du Junfeng;Zhang Min(Ocean University of China,Shandong Provincial Key Lab of Ocean Engineering,Qingdao 266100,China;State Power Investment Group Jiangsu Offshore Wind Power Co.,Ltd.,Yancheng 224000,China;Power China Fujian Electric Power Engineering Co.,Ltd.,Fuzhou 350003,China)
出处 《太阳能学报》 EI CAS CSCD 北大核心 2022年第9期236-241,共6页 Acta Energiae Solaris Sinica
基金 国家自然科学基金(51879247) 山东省自然科学基金(ZR2018MEE049)。
关键词 海上风电 风电机组 可靠性分析 失效模式 疲劳损伤 极限强度 offshore wind power wind turbines reliability analysis failure modes fatigue damage ultimate strength
  • 相关文献

参考文献1

二级参考文献13

  • 1张剑波,曾常科,肖熙.半潜式平台的极限强度分析研究[J].中国海洋平台,2005,20(3):19-22. 被引量:13
  • 2余建星,胡云昌,李晨,寇雄,郭振邦,王业宏.半潜式海洋平台整体结构的三维可靠性分析[J].中国造船,1995,36(2):41-50. 被引量:10
  • 3S Wu, J J Murray, G S Virkt. The motions and internal forces of a moored semisubmersible in regular waves[J]. Ocean Eng., 1997, 24(7) : 593-603.
  • 4Yongwon Lee, Atilla Incecik, Hoisang Chan. Prediction of global loads and structural response analysis on a muti-purpose semisub- mersible[ C]//OMAE2005-67003. 2005: 3-13.
  • 5J K Paik, B J Kim, J K Seo. Methods for ultimate limit state assessment of ships and ship-shaped offshore structures, Part II: stiffened panels[J]. Ocean Eng., 2008, 35(2): 271-280.
  • 6ANSYS. User's Manual (version 10.0)[M]. Houston: Swanson Analysis Systems Inc., 2007.
  • 7J K Paik, B J Kim, J K Seo. Methods for ultimate limit state assessment of ships and ship-shaped offshore structures, Part III: hull girders[J]. Ocean Eng., 2008, 35(2): 281-286.
  • 8American Bureau of Shipping(ABS), Rules for building and classing mobile offshore drilling units MODU_ Part_3[ S]. 2008.
  • 9Det Norske Veritas, Classification recommended practice for column-stabilised units(dnvrpc103)[ S]. 2005.
  • 10Teixeira A. Reliability of marine structures in the context of based design[ D]. MSc Thesis, University of Glasgow, Glasgow, Scotland UK, 1997.

共引文献4

同被引文献23

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部