VSC系统配置VE464箱体时的参数设置

Parameter setting when the VSC system is configured with VE464 decoder

VSC震源导航系统从2016年开始投入生产应用,现在已经在东方地球物理公司国内外震源导航施工中占据了主导地位,由于该系统在初期主要是适配VibPro电控箱体开发的,因此它与VibPro箱体系统的兼容性很强,而VibPro和VE464系统在功能特点上有一些区别,因此VSC在配置VE464时有一些特殊的参数设置需要注意,这些参数设置主要包括NEMA数据的定义、天线高的设置、VE464炮点桩号系统对导航的影响、匹配串口的设置。这些参数设置需要清晰明确,否则会出现质控风险,作者根据多年实践经验对这些做了一些总结,提出来与大家共享。

VSC vibroseis navigation system has been put into production and application since 2016,and now it has occupied a leading position in vibroseis navigation at domestic and abroad. Since the system was mainly developed to adapt to VibPro in the initial stage and has strong compatibility with VibPro. Because there are some differences between VibPro and VE464, this paper mainly focuses on some special parameter settings when VSC is compatible with VE464. These parameter settings mainly include the definition of NEMA data, the setting of antenna height, the influence of VE464 firing order system on navigation, and the setting of serial port. These parameter settings need to be clear and definite, otherwise quality control risks will occur. The authors have made some summaries of these based on years of practical experience and present them to share with you.