智能家居室内温湿度远程监测系统——云平台的应用设计

Remote Monitoring System for Indoor Temperature and Humidity of Smart Home--Application Design of Cloud Platform

对系统中云平台应用部分进行设计,实现将室内现场温湿度传感器采集到的温湿度信号上传至云端,并在云端进行温湿度及超限报警状态信号的实时显示及温湿度数据的曲线分析。本系统利用阿里云平台创建云端产品及设备,现场温湿度数据向云端设备的传输是经由核心控制器STM32借助串口助手软件QCOM_V1.6向WIFE无线通信模块ESP8266发送联网指令,再利用设备三元组及产品秘钥通过串口助手软件发送相关指令来实现;创建WEB页面,实现在WEB端温湿度数据的实时显示、曲线分析及温度超限报警,最终实现智能家居室内温湿度信号的远程监测与预警分析。

The cloud platform application part of the system is designed to upload temperature and humidity signals collected by the indoor on-site temperature and humidity sensor to the cloud,and carry out real-time display of temperature and humidity and over-limit alarm signals and curve analysis of data on the cloud.This system creates cloud products and devices on the Alibaba Cloud platform.The transmission of on-site temperature and humidity data to the cloud device is realized by sending networking commands to the WIFE wireless communication module ESP8266 through the core controller STM32 with the help of the serial port assistant software QCOM_V1.6 and by sending related instructions through the serial port assistant software with the device triplet and the secret key.And to create a WEB page realizes real-time display of temperature and humidity data on the WEB side,curve analysis and temperature over-limit alarm finally to achieve remote monitoring and early warning analysis of indoor temperature and humidity signals in smart homes.