期刊文献+

钛合金材料室温拉伸试验影响因素的研究

Research on Influencing Factors of Tensile Test of Titanium Alloy at Room Temperature
下载PDF
导出
摘要 通过试验分析,研究对比同种材料不同设备、取样位置和方向、拉伸速率、控制方式、试样平行长度段、加工方式等对性能数据的影响。研究结果表明,取样位置和方向、加工方式是影响钛合金力学性能的主要因素,其他因素的影响可以忽略。分析认为,取样位置的选取和加工工艺的优化,同时保证试样加工的质量,是确保拉伸数据准确必不可少的重要控制环节。 Through experimental analysis,the effects of different equipment,sampling location and direction,tensile rate,control mode,parallel length of sample,and processing mode of the same material on performance data have been studied and compared.The results show that the sampling location and direction and processing mode are the main factors affecting the mechanical properties of titanium alloy,while other factors can be ignored.It is concluded that the selection of sampling location and the optimization of processing technology,while ensuring the quality of sample processing,are essential and important control links to ensure the accuracy of tensile data.
作者 盛耀戈 管红亮 贾贽硕 张帅 Sheng Yaoge;Guan Hongliang;Jia Zhishuo;Zhang Shuai
出处 《大型铸锻件》 2022年第6期67-70,共4页 Heavy Casting and Forging
关键词 钛合金 拉伸速率 取样位置和方向 加工方式 力学性能 titanium alloy tensile rate sampling position and direction machining method mechanical properties
  • 相关文献

参考文献3

二级参考文献9

  • 1CampbellJE UnderwoodJH GerberichWW (汪一麟 邵本逑译).断裂力学在选材方面的应用[M].北京:冶金工业出版社,1992..
  • 2LUETJERING G.Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys.Materials Science and Engineering (A),1998,243:32-45.
  • 3PETERS P O,LUETJERING D,KOREN M,et al.Processing,microstructure,and properties of β-CEZ[J].Materials Science and Engineering (A),1996,213:71-80.
  • 4SAUER C,.LUETJERING G.Thermo-mechanical processing of high strength β-titanium alloys and effects on microstructure and properties[J].Journal of Materials Processing Technology.2001,117:311-317.
  • 5NAKAJIMA K,TERAL K,MIYATA T.The effect of microstructure on fatigue crack propagation of α+βtitanium alloys:In-situ observation of short fatigue crack growth[J].Materials Science and Engineering (A),1998,243:176-181.
  • 6ASTMA36/A36M-2008.碳素结构钢[S].
  • 7ASTMA572/A572M-2007.高强度低合金铌-钒结构钢[S].
  • 8ASMTA370/A370M-2007.钢制品力学性能的标准试验方法和定义[S].
  • 9ASTMA6/A6M-2008.结构钢轧制棒材、钢板、型钢和钢板桩的一般要求[S].

共引文献46

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部