智慧家庭千兆组网技术研究

当前的家庭组网运行协议多为有线模式,对于网关的控制程度较低,实际的网络运行频率也较难控制,导致组网运行吞吐量下降,为此提出对智慧家庭千兆组网技术的分析及研究。根据组网的设定需求及标准,预处理家庭组网环境,利用无线网络运行协议代替有线模式,设定多层级的网关控制程序,统一网络运行频率,实现千兆组网智慧运行协议的优化与制定,在此基础之上,选择ZIGBEE组网模块相互搭接的模式,结合网络应用状态,进行网关调控与路由器频段的设定,最终实现家庭组网的构建。测试结果表明:测试的千兆组网最终得出的运行吞吐量均在125 MB/s以上,超出了预设的标准,表明组网经过处理和优化,网速与处理数据的能力明显提升,为人们日常的生活提供了更大的便利条件,具有实际的应用价值。

Most of the current home networking protocols are wired. The degree of control over the gateway is low, and the actual network operating frequency is also difficult to control, resulting in a decline in the network operating throughput. Therefore, this paper proposes an analysis and research on the gigabit networking technology for smart homes. According to the networking requirements and standards, preprocess the home networking environment, use the wireless network operation protocol to replace the wired mode, set a multi-level gateway control program, unify the network operation frequency, and achieve the optimization and formulation of gigabit networking intelligent operation protocol. On this basis, select the mode of overlapping ZIGBEE networking modules, and combine the network application status to set the gateway regulation and router frequency band, Finally, realize the construction of home networking. The test results show that the final operation throughput of the tested gigabit networking is more than 125 MB/s, which exceeds the preset standard, indicating that the networking has been processed and optimized, and the network speed and data processing ability have been significantly improved, providing greater convenience for people’s daily life, and has practical application value.