期刊文献+

永磁同步驱动在密炼机上的应用 被引量:1

Application of permanent magnet synchronous drive in internal mixer
下载PDF
导出
摘要 本文主要介绍了永磁同步驱动在密炼机主机驱动系统上的应用。分析了永磁同步电机与直流、交流变频电机的区别,以及不同结构高压变频器在驱动永磁同步电机方式上的差异。通过不同驱动方式之间的对比,阐述了永磁同步驱动系统的特性与优势,并就永磁同步驱动将会成为未来密炼机主机驱动的发展方向和趋势进行了探讨。 This paper mainly introduces the application of permanent magnet synchronous drive in the main engine drive system of internal mixer.The differences between permanent magnet synchronous motor(PMSM)and DC and AC variable frequency motor,as well as the differences of different high-voltage inverters in driving PMSM are analyzed.Through the comparison of different driving modes,the characteristics and advantages of the permanent magnet synchronous drive system are described,and the development direction and trend of the permanent magnet synchronous drive will become the main engine drive of the internal mixer in the future are discussed.
作者 王俊 杨小林 杨义志 孙伟 Wang Jun;Yang Xiaolin;Yang Yizhi;Sun Wei(Double Coin Group(Jiangsu)Tire Co.LTD.,Rugao 226500,Jiangsu,China;Shanghai STEP Electromechanical Technology Co.LTD.,Shanghai 201802,China)
出处 《橡塑技术与装备》 CAS 2022年第12期8-13,共6页 China Rubber/Plastics Technology and Equipment
关键词 密炼机 永磁同步电机 高压变频器 节能降耗 工艺提升 internal mixer permanent magnet synchronous motor high voltage inverter energy saving and consumption reduction process improvement
  • 相关文献

参考文献1

二级参考文献17

  • 1Dai Ying, Song Liwei, Cui Shumei. Development of PMSM drives for hybrid electric car applications[J]. IEEE Transactions on Magnetics, 2007, 43(1): 434- 437.
  • 2Rashed M, MacConnell P F A, Stronach A F, et al. Sensorless indirect-rotor-field-orientation speed control of a permanent-magnet synchronous motor with stator-resistance estimation[J]. IEEE Transactions on Industrial Electronics, 2007, 54(3): 1664-1675.
  • 3Geyer T, Papafotiou G, Morari M. Model predictive direct torque control, part I: Concept, algorithm, and analysis[J]. IEEE Transactions on Industrial Elec- tronics, 2009, 56(6): 1894-1905.
  • 4Morel F, Lin Shi X, Retif J M, et al. A comparative study of predictive current control schemes for a permanent-magnet synchronous machine drive[J]. IEEE Transactions on Industrial Electronics, 2009, 56(7): 2715-2728.
  • 5Preindl M, Schaltz E. Sensorless model predictive direct current control using novel second-order pll observer for PMSM drive systems[J]. IEEE Transa- ctions on Industrial Electronics, 2011, 58(9): 4087- 4095.
  • 6Duran M J, Prieto J, Barrero F, et al. Predictive current control of dual three-phase drives using restrained search techniques[J]. IEEE Transactions on Industrial Electronics, 2011, 58(8): 3253-3263.
  • 7Rodriguez J, Kennel R, Espinoza J, et al. High- performance control strategies for electrical drives: An experimental assessment[J]. IEEE Transactions on Industrial Electronics, 2012, 59(2): 812-820.
  • 8Vargas R, Ammann U, Rodríguez J, et al. Predictive strategy to control common-mode voltage in loads fed by matrix converters[J]. IEEE Transactions on Industrial Electronics, 2008, 55(12): 4372-4380.
  • 9Cortés P, Kouro S, La Rocca B, et al. Guidelines for weighting factors design in model predictive control of power converters and drives[C]//IEEE Inter- national Conference on Industrial Technology, ICIT 2009, 2009: 1-7.
  • 10Preindl M, Bolognani S. Model predictive direct torque control with finite control set for PMSM drive systems, part 1: maximum torque per ampere oper- ation[J]. IEEE Transactions on Industrial Informatics, 2013, 4(9): 1912-1921.

共引文献135

同被引文献2

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部