期刊文献+

基于离散元方法的氦冷陶瓷增殖包层球床压缩性能研究

Study on compression performance of helium cooled ceramic breeder blanket pebble bed based on discrete element method
下载PDF
导出
摘要 基于开源离散元软件LIGGGHTS-PUBLIC对不同破碎率的Li_(4)SiO_(4)球床进行了单轴压缩试验模拟以研究球床的压缩性能。计算结果表明,在相同的球床应变下,球床应力随着破碎颗粒数量的增大而减小。球床破碎率和恢复系数共同影响球床的整体强度。在球床应变整体较小时,球床平均填充率随球床应变的增大呈线性增大。球床平均配位数随球床应变的增大而增大,并随球床破碎率的增大而减小。 Based on the open source discrete element software LIGGGHTS-PUBLIC,the uniaxial compression tests were simulated on Li_(4)SiO_(4) pebble bed with different crushing ratio to study the compression performance of the pebble bed.The results show that under the same pebble bed strain,the pebble bed stress decreases with the increase of broken particles.The crushing ratio and the restitution coefficient affect the overall strength of the pebble bed together.When the overall strain of the pebble bed is small,the average packing fraction of the pebble bed increases linearly with the increase of the strain of the pebble bed.The average coordination number of the pebble bed increases with the increase of the strain of the pebble bed,and decreases with the increase of the crushing ratio of the pebble bed.
作者 王开松 杨皓 汪键 雷明准 WANG Kai-song;YANG Hao;WANG Jian;LEI Ming-zhun(School of Mechanical Engineering,Anhui University of Science and Technology,Huainan 232001;Institute of Plasma Physics,Chinese Academy of Science,Hefei 230031;University of science and technology of China,Hefei 230031)
出处 《核聚变与等离子体物理》 CAS CSCD 北大核心 2022年第3期295-300,共6页 Nuclear Fusion and Plasma Physics
基金 中国科学院合肥大科学中心协同创新培育基金项目(2019HSC-CIP006)。
关键词 氦冷陶瓷增殖包层 离散元方法 压缩性能 单轴压缩分析 球床 Helium-cooled ceramic breeder blanket Discrete element method Compression performance Uniaxial compression analysis Pebble bed
  • 相关文献

参考文献4

二级参考文献32

  • 1黄青富,詹美礼,盛金昌,罗玉龙,张霞.基于颗粒离散单元法的获取任意相对密实度下级配颗粒堆积体的数值方法[J].岩土工程学报,2015,37(3):537-543. 被引量:16
  • 2冯开明.ITER实验包层计划综述[J].核聚变与等离子体物理,2006,26(3):161-169. 被引量:52
  • 3秦志英,陆启韶.基于恢复系数的碰撞过程模型分析[J].动力学与控制学报,2006,4(4):294-298. 被引量:73
  • 4CHENG Y F,GUO S J,LAI H Y.Dynamic simulation of random packing of spherical particles[J].Powder Technology,2000,107:123-130.
  • 5LIU L F,ZHANG Z P,YU A B.Dynamic simulation of centripetal packing of mono-sized spheres[J].Physica A,1999,268:433-453.
  • 6CUNDALL P A,STRACK O D L.A discrete numerical model for granular assemblies[J].Geotechnique,1979,29:47-65.
  • 7BATHURST R J,ROTHENBURG L.Micromechanical aspects of isotropic granular assemblies with linear contact interactions[J].J.Appl Mech,1988,55:17-23.
  • 8THORTON C,BAMES D J.Computer simulated deformation of compact granular assemblies[J].Acta Mechanic,1986,64:45-61.
  • 9KUHN M R,MITCHELL J R.Modeling of soil creep with the discrete element method[J].Engineering Computations,1992,9(2):277-287.
  • 10GHABOUSSI J,BARBOSA R.Three-dimensional discrete element method for granular materials[J].Int J Numer Analytic Meth Geomech,1990,14:451-472.

共引文献36

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部