摘要
试验采用原位矿化染色技术对超细涤纶仿麂皮绒织物进行染色,分析了预矿化和矿化工艺参数对染色效果的影响。优化的工艺为:预矿化助剂XPN 2%(omf),80℃预矿化处理20 min;矿化助剂XBD 1%(omf)、XYS 5%(omf),90℃矿化染色加工30 min。染色织物能获得与传统工艺一致的色泽,且色牢度更优。
In-situ mineralization dyeing technology is used to dye superfine polyester suede-like fabric,and the influence of pre-mineralization and mineralization process on dyeing effect is analyzed.The results show that with 2%(omf)of the pre-mineralizing agent XPN,pre-mineralization temperature 80℃and pre-mineralization time 20 min,1%(omf)of mineralization auxiliary XBD,5%(omf)of XYS,mineralization temperature 90℃and mineralization time 30 min,the dyed fabrics can obtain the same color as those dyed by traditional technology,and the color fastness is better than those dyed by traditional technology.
作者
陆健华
徐成书
邢建伟
欧阳磊
辛舜星
LU Jianhua;XU Chengshu;XING Jianwei;OUYANG Lei;XIN Shunxing(School of Textile Science and Engineering,Xi′an Polytechnic University,Xi′an 710048,China;State Key Laboratory of Intelligent Textile Materials and Products,Xi′an Polytechnic University,Xi′an 710048,China)
出处
《印染》
CAS
北大核心
2022年第12期22-25,共4页
China Dyeing and Finishing
关键词
原位矿化染色
分散染料
超细涤纶
仿麂皮绒
in-situ mineralization dyeing
disperse dyes
superfine polyester
suede-like fabric
