摘要
Based on comprehensive analysis of cores,thin sections,logging and seismic data,the sequence stratigraphy and sedimentary evolution of the third and fourth members of Sinian Dengying Formation(Deng 3 and Deng 4 members for short)in the Gaomo area of Sichuan Basin were investigated,and the favorable zones for reservoir development in the Deng 3 Member and Deng 4 Member were predicted.(1)Two Type I and one Type II sequence boundaries are identified in the Deng 3 and Deng 4 members.Based on the identified sequence boundaries,the Deng 3 and Deng 4 members can be divided into two third order sequences SQ3 and SQ4,which are well-developed,isochronal and traceable in this area;the SQ3 thins from west to the east,and the SQ4 thins from northwest to southeast.(2)The sedimentary environment from the depositional period of SQ3 to SQ4 has experienced the evolution from mixed platform to rimmed platform,and the platform rimmed system on the west side is characterized by the development of platform margin microbial mound and grain shoal assemblages.The intraplatform area is a restricted platform facies composed of a variety of dolomites,and there are local micro-geomorphic highlands of different scales and scattered intraplatform mounds and shoals.(3)The Deng 4 Member reservoirs,with obvious facies-controlled characteristic,are mainly distributed in the upper part of high-frequency upward shallow cycle and the high-stand systems tract of the third-order sequence vertically,and are more developed in the platform margin belt than in the intraplatform belt,and more developed in the Gaoshiti platform margin belt than in the west Suining platform margin belt on the plane.(4)Three types of favorable reservoir zones of Deng 4 Member have been finely delineated with 3D seismic data;among them,the mound and shoal facies zones developed in the ancient highlands of the intraplatform are the first choice for the next exploration and development of the Deng 4 Member.
基金
Petro China-Southwest Petroleum University Innovation Consortium Science and Technology Cooperation Project(2020CX010000)。