摘要
分析了不同湿法炼锌工艺锌焙烧矿中回收铜的工艺,发现各工艺都存在不同的工艺缺点。借鉴国内锌冶炼企业开展的常规两段浸出法提高铜回收率的生产经验,进行了锌焙烧矿中铜、铁、硅的浸出机理研究,并且根据该机理提出了常规两段浸出法的改进工艺流程,按照该工艺流程开展了试验研究,将铜的回收率提高到了76.41%。
In this paper, the recovery of copper from zinc roasted ore by different hydrometallurgy process is analyzes. It is found that the process with high copper recovery rate has different technical shortcomings. Referring to the production practice of improving copper recovery rate by conventional two-stage leaching carried out by domestic smelting enterprises, the leaching mechanism of copper, iron and silicon in zinc roasted ore is studied, and according to the mechanism, the conventional two-stage leaching is proposed to improve the process flow, and the experimental study is carried out according to the process flow, and the recovery rate of copper reached 76.41%.
作者
吴钧
曾鹏
周中华
邱伟佳
张少博
杨全胜
姜艳
WU Jun;ZENG Peng;ZHOU Zhong-hua;QIU Wei-jia;ZHANG Shao-bo;YANG Quan-sheng;JIANG Yan(Yunnan Yuntong Zinc Co.,Ltd.,Kunming 650000,Yunnan,China)
出处
《铜业工程》
CAS
2022年第6期74-78,共5页
Copper Engineering
基金
云南省科技创新人才计划(2019HC025)。
关键词
常规两段浸出
铜回收率
湿法炼锌
可溶硅
锌焙烧矿
铁矾沉铁
conventional two-stage leaching
copper recovery
zinc hydrometallurgy
soluble silicon
zinc ore roasting
iron precipitation of jarosite