期刊文献+

MIMO系统中基于代价函数和排序模式的MMSE SIC检测器

MMSE SIC Detector Based on Cost function and Ordering Mode in MIMO System
下载PDF
导出
摘要 针对多输入多输出空间多路复用系统,提出了一种基于代价函数和排序模式的多个并行分支的最小均方误差连续干扰消除检测器;具体而言,设计了选择规则来选择代价函数性能最好的分支,并通过利用不同的检测排序模式使得每个分支中的SIC算法按照信号干扰噪声比由高到低来检测信号,从而实现完全检测分集;为了进一步降低算法的计算复杂度,还提出了一种采用递归最小二乘算法的有效自适应接收机来更新滤波器权值向量,从而获得基于递归最小二乘算法的MB-SIC接收机的自适应实现;此外,还对提出的检测器在比特差错概率性能方面进行了分析;仿真结果表明,相比于现有的检测算法,提出的算法不仅具有较低的计算复杂度,而且能获得更好的误码率性能。 Aimed at a multiple-input multiple-output(MIMO) space multiplexing system, based on multiple parallel branches of cost function(CF) and ordering mode(OM), a successive interference cancellation(SIC) detector with minimum mean square error is proposed. Specifically, a selection rule is designed to select the branch with the best performance of cost function, by using different detection ordering modes and signal-to-noise ratio, the SIC algorithm of each branch can detect the signal form high to low and realize the full detection diversity. In order to further decrease the algorithm complexity, an effective adaptive receiver is proposed to update the filter weight vector using recursive least square method, so an adaptive implementation of MB-SIC receiver is obtained on the basis of recursive least square method;In addition, the bit error probability of the proposed detector is analyzed. Simulation results show that, compared with existing detection algorithms, the proposed algorithm not only has lower computational complexity, but also can obtain better bit error rate.
作者 杨雅颂 胡杰 YANG Yasong;HU Jie(Fuzhou Vocational and Technical College,Fuzhou 350108,China;Nanjing University of Aeronautics and Astronautics,Nanjing 211106,China)
出处 《计算机测量与控制》 2023年第1期22-29,共8页 Computer Measurement &Control
基金 江苏省自然科学基金(BK20200805)。
关键词 多输入多输出系统 分集增益 连续干扰消除 代价函数 最小均方误差 选择规则 误码率 MIMO system diversity gain successive interference cancellation cost function minimum mean square error selection rules bit error rate
  • 相关文献

参考文献9

二级参考文献27

共引文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部