MicroPython软件开发平台的ESP32 C3通信性能测试

ESP32 C3 Communication Performance Test Based on MicroPython Software Developnent Platform

现有的ZigBee通信方法成本较高、结构复杂,而智能家居对软硬件成本比较敏感。针对此,本文基于开源开发语言MicroPython搭建了ESP32 C3芯片网络传输性能的测试系统。该测试完成了PC与单台ESP32 C3下位机单数据包传输,PC与ESP32 C3的大数据传输,ESP32 C3AP与ESP32 C3下位机的网络传输特性测试,ESP32 C3作为AP,PC与ESP32 C3下位机网络传输特性测试。实验结果表明,ESP32 C3的单数据包传输时间主要变化范围为6~30 ms,基于ESP32 C3 AP的通信方案的传输时间最长为125 ms,8~2048k大数据的归一化传输时间的主要波动变化范围是3~5 ms,传输速度比较稳定。ESP32 C3单芯片网络传输系统的带宽为1.3~2.7 Mb/s,满足智能家居的开关信号及监控静态图像的传输速度要求。

The existing ZigBee communication methods have high cost and complex structure,while smart home is more sensitive to the cost of software and hardware.In view of this,a test system for the network transmission performance of ESP32 C3 chips is built based on the MicroPython.This test completed the single data packet transmission between PC and a single ESP32 C3 slave computer,the big data transmission between PC and ESP32 C3,the network transmission characteristics test between ESP32 C3AP and ESP32 C3 slave computer,the network transmission characteristics test between ESP32 C3 as AP,and between PC and ESP32 C3 slave computer.The test results show that the main variation range of single packet transmission time of ESP32 C3 is 6~30 ms.The maximum transmission time of communication scheme based on ESP32 C3 AP is 125 ms.The main fluctuation range of normalized transmission time of 8~2048k big data is 3~5 ms.The transmission speed is relatively stable.The bandwidth of the ESP32 C3 single chip network transmission system is 1.3~2.7 Mb/s,which meets the transmission speed requirements of the switch signal and monitoring static image of smart home.