期刊文献+

湍流模型与进口流量对中心分级燃烧室冷态流场影响研究

下载PDF
导出
摘要 分别采用了Realizable k-ε和WALE LES模型对中心分级燃烧室的冷态流场进行了数值研究,揭示了同一工况点下不同湍流模型之间的差异,并获得了进口流量对冷态流场的影响规律。结果表明:在冷态下,Realizable k-ε模型中心回流区几何特征与流线几乎不随进口质量流量变化;而在WALE LES模型中,中心回流区及内部流场随进口流量变化较大,但中心回流区内的顺压力梯度速度矢量始终存在,导致了“C形”回流区、“环形”回流区的形成;Realizable k-ε模型中燃烧室内的轴向速度与进口质量流量成正比,而WALE LES模型的轴向速度在Realizable k-ε模型的基础上波动;在WALE LES模型中,随着进口流量的增大,唇口回流区与中心回流区连接,而Realizable k-ε模型中并无该现象。
出处 《中国科技纵横》 2022年第24期77-80,共4页 China Science & Technology Overview
  • 相关文献

参考文献3

二级参考文献31

  • 1Mongia H C. TAPS A 4th generation propulsion combustor technology for low emissions[R]. AIAA Paper 2003 2657,2003.
  • 2SHI Jiarong,XU Huasheng. Designing features and critical technologies for civil aero engine combustor[C]//Propul sion Branch of the Aeronautic and Astronautic Acad. Shenzhen, China : [s. n. ],2007.
  • 3Stouffer S D, Ballal D R, Zelina J, et al. Development and combustion performance of a high pressure WSR and TAPS combustor[R]. AIAA Paper 2005 1416,2005.
  • 4Mongia H C. Perspective of combustion modeling for gas turbine combustors[R]. AIAA Paper 2004 156,2004.
  • 5Mongia H C. A synopsis of gas turbine combustor design methodology evolution of last 25 years[R]. ISABE- 2001- 1086,2001.
  • 6Martin B L,Ashwani K G. Twin fluid atomization and novel lifted swirl stabilized spray falme[J]. Journal of Pro pulsion and Power,2009,25(2) :344-357.
  • 7David L B, Clifford E S. Transient lean blowout modeling of an aero low emission fuel injector[R]. AIAA -2003- 4520, 2003.
  • 8Jun K, Quang V N. Observation of turbulent mixing in lean direct injection combustion at elevated pressure[J].AIAA Journal,2008,46(12) :3116-3127.
  • 9Stubbs R M,Liu N S. Preview of the national combustion code[R]. AIAA 97-3314,1997.
  • 10Launder B E,Spalding D B. The numerical computation of turbulent flows[J]. Computer Method in Apllied Mechan ics and Engineering, 1974,3(2) :269 289.

共引文献45

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部