期刊文献+

纯氧钢包烘烤器的设计开发

Design and Development of Roaster for Steel Ladle in Pure Oxygen
下载PDF
导出
摘要 针对钢包蓄热式烘烤器使用中由于蓄热体经常损坏、换向系统维修量大等原因导致功能失效的问题,设计了新型纯氧钢包烘烤器,该烘烤器的纯氧助燃烘烤烧嘴既可低温缓步升温,又可实现高温快速烘烤。新型纯氧钢包烘烤器运行稳定可靠,能够提高烘烤效率,设备节能率达到40%以上,并可大幅度降低NOx及碳排放量。 With regard to the problem of the functional failure ocurred in the heat-stora ge roaster for a steel ladle caused by such factors as frequent damaging of the heat accumulator and too much maintenance for the commutator system,the new type of roaster for steel ladle in pure oxygen was designed,whose pure oxygen combustion-supporting roasting burner could achieve the slow rising in temperature starting from low temperature domain and fast roasting in high temperature.So the new-developed roaster was in operation reliably and smoothly,which could improve the roasting efficiency,and thus the energy saving rate for the equipment was more than 40%,while NOxemissions and carbon emissions also reduced greatly.
作者 贾丽娣 马光宇 柴蕴 高波 王东山 张炎 JIA Lidi;MA Guangyu;CAI Yun;GAO Bo;WANG Dongshan;ZHANG Yan(State Key Laboratory of Metal Material for Marine Equipment and Application,Anshan 114009,Liaoning,China;Ansteel Iron&Steel Research Institutes,Anshan 114009,Liaoning,China;Energy Management and Control Centre of Ansteel,Anshan 114021,Liaoning,China;General Steelmaking Plant of Angang Steel Co.,Ltd.,Anshan 114021,Liaoning,China)
出处 《鞍钢技术》 CAS 2023年第1期35-38,共4页 Angang Technology
关键词 钢包烘烤 纯氧助燃烘烤烧嘴 弥散燃烧 ladle roasting pure oxygen combustion-supporting roasting burner dispersion combustion
  • 相关文献

参考文献1

二级参考文献21

  • 1赵黛青,杨浩林,鲁冠军,冯耀勋,杨卫斌.甲烷/富氧扩散火焰燃烧区域的分层特性研究[J].工程热物理学报,2006,27(z2):131-134. 被引量:4
  • 2潘亮.富氧燃烧火焰特性及热工特性试验研究[D].吉林:吉林大学,2006.
  • 3美国空气液化公司.PYRETRON staged high radiative burnertechnology [ Z ]. http ://www. us. airliquide, corn, 2008.
  • 4Harley A. Oxygen-fuel burner with adjustable flame characteristics: US ,6659762B2 [ P ]. 2003-12-09.
  • 5John E. Oxygen aspirator burner for firing a furnace: US, 4541796[P]. 1985-09-17.
  • 6Charles E B. Industrial Burners Handbook [ M 1. Boca Raton : CRC Press, 2004.
  • 7Mahendra L J. Self-cooled oxygen-fuel burner for use in high- temperature and high particulate furnace: US,6210151B1 [ P]. 2001- 04-03.
  • 8John T B. Wide range oxy-fuel burner and furnace operation: US, 4986748 [ P]. 1991-06-22.
  • 9Edward F K. Burner and method for metallurgical heating and melting: US,5145361 [ P]. 1992-12-08.
  • 10钮龙英.高富氧燃烧器:中国,2366695Y[P].2000:3-01.

共引文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部