光通信领域的连接器自动化设备技术研究与应用

Research and Application of Connector Automation Equipment Technology in the Field of Optical Communication

将光纤连接器用作光纤通信的(传输)接口,以实现各种模块,由于设备与系统之间的灵活联系,需要光缆与光纤中间的可分离(移动)连接器件,为了达到预期目的或要求所必需的信道传输光路。需要正确连接光缆的两端,保证光缆的传输功率就可以尽可能的耦合至收到者光缆信号,从而能够使光连接与传输系统的效果减至最小化。光纤连接器是用来完成控制系统中仪器、器件与光纤与光缆间的非永久的固态连接器。光纤连接器作为光互连产品的关键部件,是目前光纤通信体系中使用得最为普遍的无源光电子器件。它也是实现光缆与光纤之间、光缆与设备间快速安全连通与隔离的一种方法。

The optical fiber connector is used as the(transmission)interface of optical fiber communication to realize various modules.Due to the flexible connection between the equipment and the system,a separable(mobile)connection device between the optical fiber cable and the optical fiber is required.In order to achieve the intended purpose or Required channel transmission light path.It is necessary to connect the two ends of the optical cable correctly to ensure that the transmission power of the optical cable can be coupled to the signal of the receiver optical cable as much as possible,so that the effect of the optical connection and transmission system can be minimized.Optical fiber connectors are non-permanent solid-state connectors used to complete instruments,devices,and optical fibers and cables in control systems.As a key component of optical interconnection products,optical fiber connectors are the most commonly used passive optoelectronic devices in optical fiber communication systems.It is also a method to achieve fast and safe connection and isolation between optical cables and optical fibers,and between optical cables and equipment.