基于单片机智能水池设计

Intelligent Pool Design Based on Single Chip Microcomputer

水资源中的污染以及人们现在对于水资源的质量是越来越关注,也正是因为这样才对水产养殖的方面的发展造成了非常大的危急。本论文首先介绍了智能水池系统目前的国内外发展情景状况,单片机的外部元件以及内部的程序编程应用于智能水池系统。主要的硬件部分是通过STC89C52型号的单片机用作于中心控制模块,智能水池系统中通过与复位模块、显示模块、按键模块、温度传感器、浑浊度检测仪一起来构成智能水池系统的硬件电路,再将通过编辑软件程序,来使得能够实现本课题设计需要实现的功能:通过使用按键输入来更改PH的最大值与最小值,PH的最大值可设置的范围为4-14,最小值设置范围为0-4。通过使用浑浊度检测仪检测待测液体,设置PH值为7,如果超出设置值时蜂鸣器报警,显示模块可以实时观看测量的温度与PH值。

Pollution in water resources leads to people's increasing concern about the quality of water resources which poses a great challenge to the development of aquaculture.Firstly,this paper introduces the current development of the intelligent pool system at home and abroad,the external components of the Single Chip Microcomputer and the application of internal programming in the intelligent pool system.The hardware part is composed of STC89C52 microcontroller,which is used as the central control module.The hardware circuit of the intelligent pool system is composed of reset module,display module,key module,temperature sensor and turbidity detector.Then the software program can be edited to realize the functions required for the design of this subject.The maximum and minimum PH values are changed by keystroke input.The maximum value of PH can be set in the range of 4-14,and the minimum value can be set in the range of 0-4.The liquid under test is detected by a turbidity detector and the PH value can be set to 7.If the PH value exceeds the set value,the buzzer will alarm.The measured temperature and PH value are displayed on the display module in real time,which can be viewed at any time.