Seismic safety assessment of trains running on high-speed railway bridges with chloride-induced corroding piers

For the lifetime assessment of the running safety of a train in aggressive environments and earthquake-prone areas,the effects of corrosion on seismic performance must be considered.Research on the running safety of trains,including corrosion damage,is limited,despite the fact that seismic safety assessment of trains on high-speed railway bridges has been extensively examined.In this work,the running safety of a train was evaluated using a time-varying corroded bridge finite-element model established in OpenSees.Two pier types were considered,and three ground-motion types were selected for performing seismic performance evaluations.Subsequently,the seismic response of the corroded bridge-track structure under an earthquake was analyzed.The spectrum intensity was used as the structural response index for the running safety assessment of trains under earthquakes,and the long-term safety of trains on bridges with different pier heights and earthquake types,considering different corroding deterioration,was evaluated.The results indicate that under low-level earthquakes,piers are primarily in a linear elastic state and least influenced by corrosion;whereas under high-level earthquakes,the running safety of trains on a bridge significantly deteriorates after corrosion,particularly for high-pier bridges,mainly because the corroded piers are more likely to yield lower post-yield stiffness.The results of this study suggest that in the seismic safety assessment of trains on corroded bridges,timevarying seismic performance characteristics should be considered.