Multi-probe linear fitting and time of arrival linear correction method to analyze blade vibration based on blade tip timing without once-per-revolution

Blade vibration monitoring can ensure the safe operation of aeroengine rotor blades.Among the methods of blade vibration monitoring,Blade Tip Timing(BTT)method has attracted more and more attention because of its advantages of non-contact measurement.However,it is difficult to install the Once-Per-Revolution(OPR)probe in the confined space of aeroengine,and the failure and instability of the OPR signal will reduce the reliability of the blade vibration analysis results,which directly affects the accuracy of the blade vibration parameters identification.The Multi-Probe linear fitting and Time of Arrival(ToA)Linear Correction method based on the BTT(MP-LC-BTT)without OPR is proposed to reduce the errors of single probe linear fitting method for blade vibration displacement analysis.The proposed method can also correct the calculation error of blade vibration displacement due to the nonlinear change of rotation speed,which can improve the analysis accuracy of the blade vibration displacement.A new blade vibration model conforming to the actual vibration characteristics is established,and the effectiveness of the proposed method is verified by numerical simulation.Finally,the reliability and accuracy of the MP-LC-BTT method have been verified by the experiments which include two high-speed blade test-benches and an industrial axial fan.This method can be used in the actual aero-engine monitoring instead of the BTT method with OPR.