期刊文献+

基于双谐振电路的直流充电桩拓扑结构研究 被引量:1

Research on the Topologic Structure of DC Charging Pile Based on Double Resonant Circuit
下载PDF
导出
摘要 提出了一种新型的基于双谐振电路的直流充电桩拓扑结构,该结构在传统移相全桥(PSFB)变换器的基础上增设了两组谐振网络,并采用输入串联-输出并联(ISOP)的连接方式,以契合大功率能量传输的应用背景。所提DC/DC变换器兼具谐振特性与箝位特性,有助于提升变换器的能量传递效率和电压利用率,还拥有高频电气隔离、软开关、适合大功率能量传输等优点。首先阐述了电路的工作原理,然后对变换器的参数设计进行了详细讨论,并通过一台20kW/760V,20 kHz的实验样机验证了该结构的正确性和优越性。 A novel topologic structure of DC charging pile based on double resonant circuit is proposed.Based on the traditional phase-shift full-bridge(PSFB) converter,two resonant networks are added.In addition,the input series-output parallel(ISOP) configuration is adopted to fit the application of high-power transmission.The proposed DC/DC converter has both resonance and clamping characteristics,which helps to improve the energy transmission efficiency and voltage utilization of the converter.It also has the advantages of high-frequency electronic isolation,soft switching,suitable for high-power transmission and so on.Firstly,the operating principle of the circuit is expounded,then the parameter design of the converter is discussed in detail.The correctness and superiority of the structure are verified by a 20 kW/760 V,20 kHz experimental prototype.
作者 张超 陶鹏 贾焦心 张洋瑞 ZHANG Chao;TAO Peng;JIA Jiao-xin;ZHANG Yang-rui(State Grid Hebei Marketing Service Center,Shijiazhuang 050000,China;不详)
出处 《电力电子技术》 CSCD 北大核心 2022年第11期68-70,75,共4页 Power Electronics
基金 国家高技术研究发展计划(863)(2015AA050603)。
关键词 变换器 双谐振电路 充电桩 converter double resonant circuit charging pile
  • 相关文献

参考文献3

二级参考文献35

  • 1顾亦磊,吕征宇,钱照明.中小功率系统集成DC/DC标准模块的一族候选拓扑[J].中国电机工程学报,2005,25(10):45-49. 被引量:21
  • 2孙铁成,汤平华,高鹏,刘鸿鹏.一种新型全桥零电压转模PWMDC-DC变换器[J].中国电机工程学报,2006,26(6):83-88. 被引量:25
  • 3马学军,牛金红,康勇.输入串联输出并联的双全桥变换器输入电容均压问题的研究[J].中国电机工程学报,2006,26(16):86-91. 被引量:23
  • 4Patterson O D, Divan D M. Pseudo-resonant full bridge DC/DC converter[J]. IEEE Transactions on Power Electronics, 1991, 6(4): 671-678.
  • 5Mweene L H, Wright C A, Schlecht M F. A 1 kW 500 kHz front-end converter for a distributed power supply system[C]//IEEE Applied Power Electronics Conference. Baltimore, USA: IEEE, 1989: 423-432.
  • 6Kim E S, Joe K Y, Kye M H, et al. An improved soft- switching PWM FB DC/DC converter for reducing conduction losses[J]. IEEE Transactions on Power Electronics, 1999, 14(2): 258-264.
  • 7Kim E S, Kim Y H. A ZVZCS FB DC/DC converter using a modified energy-recovery snubber[J]. IEEE Transactions on lndustrialElectronics, 2002, 49(5): 1120-1127.
  • 8Cha H Y, Chen L H, Ding R J, et al. An alternative energy recovery clamp circuit for full-bridge PWM converters with wide ranges of input voltage[J]. IEEE Transactions on PowerElectronics, 2008, 23(6): 2828-2837.
  • 9Sabate J A, Vlatkovic V, Ridley R B, et al. High voltage high power ZVS full bridge PWM converter employing active snubber[C]//IEEE Applied Power Electronics Conference. Dallas, TX, USA: IEEE, 1991: 158-163.
  • 10Ahmed 0 A, Bleijs J. Optimized active-clamp circuitdesign for an isolated full-bridge current-fed DC/DC converter[C]//Power Electronics Systems and Applications. HongKong, China: IEEE, 2011: 1-7.

共引文献23

同被引文献6

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部