基于断裂力学的立式杀菌锅全寿命疲劳分析

Full-life fatigue analysis of vertical retort based on fracture mechanics

目的:研究一种新型立式杀菌锅在热机循环载荷下的疲劳强度,特别是在锅体出现裂纹后的剩余疲劳寿命以及影响杀菌锅疲劳裂纹扩展的因素.方法:从杀菌锅结构完好的设计疲劳寿命和有裂纹后的剩余疲劳寿命两个方面对其进行全寿命疲劳分析.采用Workbench分析杀菌和3种循环载荷下杀菌锅的力学特性;基于SGN曲线研究杀菌锅在3种交变应力下的设计疲劳寿命;基于断裂力学原理研究初始裂纹尺寸、压力、温度对有裂纹杀菌锅应力强度因子和剩余疲劳寿命的影响.结果:此类立式杀菌锅的设计疲劳寿命为5×10^(5)次,满足设计需要且有一定安全余量;基于断裂力学分析得出杀菌锅裂纹尺寸寿命曲线,对含缺陷杀菌锅剩余寿命进行预测,具有一定创新性.结论:使用过程中应关注锅体内部裂纹的产生和扩展情况,可以根据试验提出的方法对杀菌锅裂纹缺陷进行强度分析和寿命预测.

Objective:The fatigue strength of a new type of vertical retort under the cyclic load of heat engine was studied,especially the residual fatigue life of the pot body after the crack appeared and the factors affecting the fatigue crack propagation of the germicidal pot.Methods:The mechanical characteristics of retort under sterilization and three kinds of cyclic loads were analyzed by Workbench,the design fatigue life of the retort under three alternating stresses was studied based on the S-N curve.The effect of the initial crack size,pressure and temperature on the stress strength factor and residual fatigue life of the crack retort were studied based on fracture mechanics.Results:The design fatigue life of this type of vertical retort was calculated to be 5×10^(5)times,which meet the design requirements,and has a certain safety margin.Based on the fracture mechanics analysis,the crack size life curve of the sterilization retort was obtained,and the residual life of the sterilization retort with defects was predicted,which had certain innovation.Conclusion:Attention should be paid to the occurrence and propagation of cracks in the pot during use.The strength analysis and life prediction analysis of crack defects in the sterilization retort can be carried out according to the method proposed in this paper and experiment.