摘要
通过分散液吸光度法探究了纤维素纳米晶体(CNC)的吸光度与直径的关系。结果表明,当CNC质量分数0.06%、测试波长220 nm、静置时间0 h时,随着CNC直径增大,分散液的吸光度值逐渐减小,CNC直径与吸光度有良好的线性关系,Y (吸光度)=-0.0054X (CNC直径)+0.4438,线性相关系数R2为0.9931。
In this study, the relationship of absorbance and diameter of cellulose nanocrystal(CNC) was investigated by the suspension absorbance method. The results showed that when the CNC was 0. 06 wt% with the test wavelength of 220 nm for 0 h, the absorbance value of CNC dispersion gradually decreased with the increase of CNC particle size. There was a good linear relationship between CNC diameter and absorbance, of which the linear equation was that Y(absorbance)=-0. 0054X(CNC diameter)+0. 4438, with a linear correlation R~2 of 0. 9931.
作者
苏德凤
刘路
邢佳琳
詹卫民
黄善聪
夏新兴
SU Defeng;LIU Lu;XING Jialin;ZHAN Weimin;HUANG Shancong;XIA Xinxing(Cllege of Textile Science and Engineering,Zhejiang Sci-Tech University,Hanghou,Zhejiang Province,310018;Zhejiang Jinchang Specially Co.,Ltd.,Quzhou,Zhejiang Province,324400)
出处
《中国造纸》
CAS
北大核心
2023年第2期38-42,共5页
China Pulp & Paper
基金
浙江省重点研发计划(2020C02043)。