基于网格化管理的医疗设备质量控制管理体系构建

Construction of Medical Equipment Quality Control Management System Based on Grid Management

目的通过构建基于网格化管理的医疗设备质量控制管理体系,实现我院医疗设备的规范化管理。方法通过引入网格化管理模式,采取健全组织架构、明确职责范围、实施三级质控、加强部门合作、开发智慧物联医院管理系统等措施,构建医疗设备“纵向到底、横向到边、垂直到面、整体环绕”的四维质量控制管理体系。结果医疗设备巡检、预防性维护、自主检测数量与管理体系实施前对比均有显著增长,设备故障发生率明显降低(χ^(2)=5.127,P=0.024)。结论本研究构建的医疗设备质量控制管理体系,使我院医疗设备管理更加规范,为医疗质量和患者安全提供了更有力的保障,也可为其他医院提供参考。

Objective To realize standardized management of our hospital medical equipment by building a medical equipment quality control management system based on grid management.Methods Through the introduction of the grid management model,the measures such as improving the organizational structure,defining the scope of responsibilities,implementing three-level quality control,strengthening department cooperation,and developing the intelligent Internet of Things hospital management system were adopted to build a four-dimensional quality control management system for medical equipment which was“vertical to the end,horizontal to the edge,vertical to the surface,and overall surrounded”.Results The number of equipment patrol inspection,preventive maintenance,and independent inspection increased significantly compared with that before implementation,and the incidence of equipment failures decreased significantly(χ^(2)=5.127,P=0.024).Conclusion The medical equipment quality control management system constructed in this study can make the management of medical equipment in our hospital more standardized,provide a more powerful guarantee for medical quality and patient safety,and also provide reference for other hospitals.