摘要
建立了基于复合材料的塑料模板有限元模型,对其进行了静力学分析。对复合材料塑料模板进行了刚度试验,通过对比分析发现,有限元计算值与试验检测值误差在10.0%之内,证实了该复合材料塑料模板有限元建模方法的有效性。
A finite element model of plastic formwork based on composite materials is established, and its statics analysis was carried out. The stiffness test of the composite plastic formwork was carried out. By comparative analysis, it was concluded that the deviation between calculated values of the finite element method and test detection values were within 10.0%, which confirmed the effectiveness of the finite element modeling method for the composite plastic formwork.
作者
周军勇
胡谦谦
李伟
杨凯峰
李林嵩
Zhou Junyong;Hu Qianqian;Li Wei;Yang Kaifeng;Li Linsong(Guangdong Bright D ream.Robotics Co.,Ltd.,Foshan,Guangdong,528311)
出处
《现代塑料加工应用》
CAS
2022年第6期17-19,23,共4页
Modern Plastics Processing and Applications
关键词
复合材料塑料模板
聚丙烯
玻璃纤维
有限元
composite plastic formwork
polypropylene
glass fiber
finite element
