汽车三维数模的点检管理系统及方法

Spot Check System and Method for Automobile 3D Digifax

在汽车的设计开发过程中,需建立三维数模并对其进行检查,检查设计的数模是否满足国家法规的要求、产品规格是否满足设计要求、设计数模能否满足性能目标的要求等。设计点检系统可实现对三维数模信息的系统化检测,根据设计、工艺以及制造的最佳实践经验形成设计参考标准,将经验固化到设计点检数据库中,再根据设计点检数据库进行数模的校验,减少设计问题的产生,提高产品质量和产品开发效率。

In the process of automobile design and development, it is necessary to establish a 3D digifax and check the digifax to see whether the designed digital model meets the requirements of national laws and regulations, whether the product specification meets the design requirements, whether the design digifax can meet the requirements of performance objectives, etc. The design of spot check system can realize the systematic detection of 3D digifax information. Develop design reference standards based on best practices in design,process, and manufacturing, the experience is solidified into the design spot check database, then perform digifax verification according to the design spot check database, so as to reduce the occurrence of design problems, improve product quality and efficiency of product development.