基于MEMS光栅光调制器阵列的动态图像显示控制方法

基于单片机控制的动态图像显示控制方法主要通过配置单片机参数实现对图像的显示控制,由于数据读写能力较弱,导致电压负荷较大。对此,提出基于微机电系统(Micro-Electro-Mechanical System,MEMS)光栅光调制器阵列的动态图像显示控制方法。将PC端输入的文字指令编码转换为光栅光调制器阵列的图像编码,采用异步读写的方式,对USB数据控制器的读写模式进行设计,构建出动态图像显示控制电路模块。在实验中,对提出的方法进行电压负荷的验证,经实验分析证明,利用提出的方法对动态图像进行显示控制,所需的工作电压和吸合电压值较低,对显示器的电压负荷较小。

The dynamic image display control method based on SCM control mainly realizes the image display control by configuring SCM parameters.Due to the weak data reading and writing ability,the voltage load is large.Therefore,a dynamic image display control method based on Micro-Electro-Mechanical System(MEMS)grating light modulator array is proposed.The text instruction code input at the PC end is converted into the image code of the grating light modulator array.The asynchronous read/write mode is adopted to design the read/write mode of the USB data controller,and the dynamic image display control circuit module is constructed.In the experiment,the voltage load of the proposed method is verified.Through experimental analysis,it is proved that the proposed method is used to display and control the dynamic image,and the required working voltage and pull in voltage are low,so the voltage load on the display is small.