电力终端嵌入式组件信息源数据安全检测系统

Information source data security detection system for power terminal embedded component

传统组件信息源数据安全检测系统无法控制电力终端电压的稳定性,导致系统检测结果存在较大波动,应用性能不理想。为此,设计新的电力终端嵌入式组件信息源数据安全检测系统。系统硬件主要包括信息采集模块、稳压控制模块、传感信息控制模块以及人机交互模块。采用人机交互模块完成指令交互和程序加载,以嵌入式的ASP2100集成信息处理芯片作为主控芯片,在PLC总线协议控制下,构建系统人机交互接口,实现系统的硬件设计。采用嵌入式的Linux程序加载技术,实现系统软件开发。实验测试结果表明,文中所设计系统的检测输出稳定性较好,电力终端嵌入式组件信息源数据的检测概率更高,有效提高了终端的安全性能。

The traditional component information source data security detection system can not control the stability of the power terminal voltage,which leads to large fluctuations in the system detection results and unsatisfactory application performance.Therefore,a new information source data security detection system for power terminal embedded component is designed.The system hardware mainly includes information acquisition module,voltage control module,sensor information control module and human-computer interaction module.The human-computer interaction module is used to complete the instruction interaction and program loading.Then,the embedded ASP2100 integrated information processing chip is used as the main control chip,and under the control of PLC bus protocol,the human-computer interaction interface of the system is constructed to realize the hardware design of the system.The embedded Linux program loading technology is adopted to realize the system software development.The experiment results show that the detection output stability of the system designed in this paper is good,and the detection probability of the information source data of the embedded components in the power terminal is higher,which effectively improves the security performance of the terminal.