期刊文献+

基于模型驱动的大型天线系统设计优化方法

A Model-driven design optimization method for large antenna systems
下载PDF
导出
摘要 针对传统天线协同设计困难、方案可行性评估成本高、评价关系模糊等难点,引入层次分析方法,建立天线系统模型和层次评估模型,通过系统运行过程仿真和验证分析,支持设计数据的获取与计算,进而对系统设计方案进行优化分析和科学决策。以天线驱动设计方案为例进行验证分析,结果表明,提出方法显著提高了大型天线系统的设计效率,降低了设计优化成本。 Aiming at the difficulties of traditional antenna cooperative design,high cost of feasibility evaluation and fuzzy evaluation relationship,the analytic hierarchy process method is introduced to establish the antenna system architecture and hierarchical evaluation model.The simulation and verification analysis of the system model running process support the acquisition and calculation of design data,and assist the optimization analysis and scientific decision of the scheme design of the system.Finally,the antenna driving design scheme is taken as an example for verification and analysis,and the results show that this method can significantly improve the iterative efficiency of large antenna system design and reduce the cost of design optimization.
作者 陈志平 万永伟 李春光 彭祺擘 贾鹏 汪传亮 CHEN Zhiping;WAN Yongwei;LI Chunguang;PENG Qiqing;JIA Peng;WANG Chuanliang(School of Mechanical Engineering,Hangzhou Dianzi University,Hangzhou Zhejiang 310018,China;China Astronaut Research and Training Center,Beijing 100094,China)
出处 《杭州电子科技大学学报(自然科学版)》 2023年第2期19-25,共7页 Journal of Hangzhou Dianzi University:Natural Sciences
基金 国家自然科学基金资助项目(U193110164)。
关键词 MBSE 元模型 领域建模语言 AHP MBSE meta-model domain modeling language AHP
  • 相关文献

参考文献2

二级参考文献18

  • 1Michelle B, David H. System Design: New Product Development for Mechatronics[R]. Aberdeen: Ab- erdeen Group, 2008.
  • 2Thramboulidis K. Model Integrated Mechatronies-- towards a New Paradigm in the Development of Manufacturing Systems[J]. IEEE Transactions on Industrial Information, 2005,1(1) :1-14.
  • 3Hewit J. Mechatronic Design-- the Key to Perform- ance Enhancement[J]. Robotics and Autonomous Systems,1996, 19(2): 135-142.
  • 4Rzevski G. On Conceptual Design of Intelligent Mechatronic Systems[J]. Mechatronics, 2003, 13: 1029-1044.
  • 5Amerongen J. Mechatronic Design[J]. Mechatron- ies, 2003, 13: 1045-1066.
  • 6Object Management Group(OMG). Official UML Speeifieation[EB/OL]. [2011-08-15]. http:// www. omg. org /spec/ UML/ 2.4.1/.
  • 7Object Management Group(OMG). Systems Mod- eling Language specification[EB/OL]. [2010-06- 01]. http://www, omg . org /spec/SysML/1. 2/ PDF.
  • 8Turki S, Soriano T. A SysML Extension for Bond Graphs Support[C]//Sth Int. Conf. on Technology and Automation. Thessaloniki, Greece, 2005:1707- 1713.
  • 9Thomas A J, Paredis C J J, Roger B. IntegratingModels and Simulations of Continuous Dynamics In- to SysML [C]//Proc. of the 6th Int. Modelica Conf.. Bielefeld, Germany, 2008 : 135-145.
  • 10Liu Yusheng, Cao Yue, Gao Shuming. Uniform Behavior Modeling for Mechatronic Systems Based on SysML Parametric Diagram: a Case Study [C]//The 8th Int. Symp. on TMCE. Ancona, It- aly, 2010:1333-1344.

共引文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部