摘要
在纵场磁体电源变流器均流特性分析中,通过对桥臂分段和提取支路分布参数矩阵的方法,建立了大功率变流器桥臂的等效电路模型,计算了各个支路电流和变流器的均流系数。通过变流器的仿真模拟得到了桥臂电流演化,模型的仿真结果与理论计算基本一致,其均流系数均小于1.2的工程设计目标。
In the analysis of current sharing characteristics of toroidal field magnet power converter,the equivalent circuit model of the high-power converter bridge arm is established by segmenting the bridge arm and extracting the distribution parameter matrix of branches,and the current sharing coefficients of each branch are calculated.The bridge arm current of the converter is obtained by simulation.The simulation results are basically consistent with the analysis,and the current sharing coefficients are all less than the design value of 1.20.
作者
杨亚龙
张玲
蒋力
王重马
YANG Ya-long;ZHANG Ling;JIANG Li;WANG Chong-ma(Anhui Province Key Laboratory of Intelligent Building and Building Energy Saving,Anhui Jianzhu University,Hefei 230022;School of Electronic and Information Engineering,Anhui Jianzhu University,Hefei 230061;Institute of Plasma Physics,Chinese Academy of Sciences,Hefei 230031)
出处
《核聚变与等离子体物理》
CAS
CSCD
北大核心
2023年第1期26-32,共7页
Nuclear Fusion and Plasma Physics
基金
国家重点研发计划(2017YFE0300504)。
关键词
变流器
均流
分布参数
电感矩阵
Nuclear fusion
Converter module
Current sharing
Distributed parameter
Inductance matrix
