摘要
为降低暂冲式超声速风洞起动/关车过程中冲击载荷对试验模型和测量天平带来的风险,设计了一套冲击载荷抑制装置。装置由上下作动机构和平板等结构件组成,通过有限元方法对四连杆作动机构进行了受力分析,验证了结构的强度和刚度可靠性。开发了伺服控制系统及软件,结合结构动力学分析确定了控制系统参数,设计了与风洞试验过程兼容的抑制装置工作流程,定制了可视化软件界面。从结构稳定性和抑制效果两个方面对装置进行了试验验证,结果表明该装置对法向力和俯仰力矩受到的冲击载荷抑制效果较好,降幅分别可达78%和77%。
In order to reduce the risk of test model and gauge balance damages induced by shock impingement during intermittent supersonic wind tunnel startup and shutdown,an impingement attenuation device was designed.Composed of upper/lower actuating facilities and flat plates,the four-part connecting rod device was analyzed by finite element method,validating the strength and stiffness of device structures.Servo control system and accompanying software were developed,and the control parameters were determined according to structural dynamics analysis.A working procedure compatible with the wind tunnel was devised,and visualized software interface was customized.The device effectiveness was tested from structural steadiness and attenuation effect.Test results indicated that the device had a favorable effect on impingement attenuation for the normal force and pitching moment,with a decrease of amplitude up to 78%and 77%separately.
作者
刘奇
刘常青
李增军
LIU Qi;LIU Changqing;LI Zengjun(High Speed Aerodynamics Institute,China Aerodynamics Research and Development Center,Mianyang Sichuan 621000,China;Section 2,Chengdu Fluid Dynamics Innovation Center,Chengdu 610072,China)
出处
《航空动力学报》
EI
CAS
CSCD
北大核心
2023年第2期364-370,共7页
Journal of Aerospace Power
关键词
超声速风洞
冲击载荷
作动机构
伺服控制
结构动力学
风洞流场
supersonic wind tunnel
impingement
actuating facilities
servo control
structural dynamics
wind tunnel flowfield