摘要
通过实验研究邻氯甲苯中微量对氯甲苯的吸附,对不同类型的分子筛吸附剂进行筛选。结果表明:吸附剂C的吸附效果最优,最优吸附剂质量分数为12.5%,最优吸附时间为15 min;吸附过程为放热、熵减过程,且同时存在物理吸附和化学吸附;当对氯甲苯质量分数为0.45%时,吸附速率最快。
The adsorption of p-chlorotoluene in o-chlorotoluene was studied by experiments,and different types of molecular sieve adsorbent were screened.The results show that the adsorption effect of adsorbent C is the best.The optimal adsorbent dosage is 12.5%and the optimal adsorption time is 15 min.The adsorption process is exothermic and entropy decreasing,and there are physical adsorption and chemical adsorption at the same time.When the mass fraction of pchlorotoluene is 0.45%,the adsorption rate is the fastest.
作者
董亮
崔咪芬
赵晓龙
陶文平
王顺利
朱成明
DONG Liang;CUI Mifen;ZHAO Xiaolong;TAO Wenping;WANG Shunli;ZHU Chengming(China Salt Changzhou Chemical Co.,Ltd.,Changzhou 213016,Jiangsu Province,China)
出处
《上海塑料》
2023年第1期33-37,共5页
Shanghai Plastics
关键词
分子筛
吸附
分离
邻氯甲苯
提纯
热力学
动力学
molecular sieve
adsorption
separation
o-chlorotoluene
purification
thermodynamics
dynamics