Bioceramic scaffolds with triply periodic minimal surface architectures guide early-stage bone regeneration

The pore architecture of porous scaffolds is a critical factor in osteogenesis,but it is a challenge to precisely configure strut-based scaffolds because of the inevitable filament corner and pore geometry deformation.This study provides a pore architecture tailoring strategy in which a series of Mg-doped wollastonite scaffolds with fully interconnected pore networks and curved pore architectures called triply periodic minimal surfaces(TPMS),which are similar to cancellous bone,are fabricated by a digital light processing technique.The sheet-TPMS pore geometries(s-Diamond,s-Gyroid)contribute to a 3‒4-fold higher initial compressive strength and 20%-40%faster Mg-ion-release rate compared to the other-TPMS scaffolds,including Diamond,Gyroid,and the Schoen’s I-graph-Wrapped Package(IWP)in vitro.However,we found that Gyroid and Diamond pore scaffolds can significantly induce osteogenic differentiation of bone marrow mesenchymal stem cells(BMSCs).Analyses of rabbit experiments in vivo show that the regeneration of bone tissue in the sheet-TPMS pore geometry is delayed;on the other hand,Diamond and Gyroid pore scaffolds show notable neo-bone tissue in the center pore regions during the early stages(3-5 weeks)and the bone tissue uniformly fills the whole porous network after 7 weeks.Collectively,the design methods in this study provide an important perspective for optimizing the pore architecture design of bioceramic scaffolds to accelerate the rate of osteogenesis and promote the clinical translation of bioceramic scaffolds in the repair of bone defects.