摘要
文中选GS90#基质沥青为母体,二甲苯为溶剂,以古马隆树脂和苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)为改性剂,通过正交试验设计方法确定各组成合理掺量,制得一种常温型灌缝材料(CW-GHG).系统测试其低温柔韧度、5℃弹性恢复率、测力延度、断裂伸长率及复合试件裂缝壁与CW-GHG的黏结强度、抗剪切能力.结果表明:CW-GHG不仅在低温条件下具有较好的抗裂性能与变形能力,且与裂缝壁之间具有优良的黏结性能,组成的灌缝体系具有良好的抗剪切能力.
With GS90#matrix asphalt as matrix,xylene as solvent,coumarone resin and styrene-butadiene-styrene block copolymer(SBS)as modifiers,a normal temperature type joint filling material(CW-GHG)was prepared by orthogonal design.The low-temperature flexibility,elastic recovery rate at 5℃,elongation at break,bond strength between crack wall and CW-GHG and shear resistance of composite specimens were systematically tested.The results show that CW-GHG not only has good crack resistance and deformation ability at low temperature,but also has excellent bonding performance with the crack wall,and the joint filling system has good shear resistance.
作者
晏超
陈辉强
YAN Chao;CHEN Huiqiang(School of Civil Engineering,Chongqing Jiaotong Univesity,Chongqing 400074,China)
出处
《武汉理工大学学报(交通科学与工程版)》
2023年第2期374-379,共6页
Journal of Wuhan University of Technology(Transportation Science & Engineering)
关键词
高寒山区
沥青路面
裂缝
常温灌缝材料
alpine region
asphalt pavement
crack
room temperature filling material