Flexible sodium-ion capacitors boosted by high electrochemicallyreactive and structurally-stable Sb_(2)S_(3)nanowire/Ti_(3)C_(2)Tx MXene film anodes

The rapid development of portable,foldable,and wearable electronic devices requires flexible energy storage systems.Sodiumion capacitors(SICs)combining the high energy of batteries and the high power of supercapacitors are promising solutions.However,the lack of flexible and durable electrode materials that allow fast and reversible Na+storage hinders the development of flexible SICs.Herein,we report a high-capacity,free-standing and flexible Sb2S3/Ti_(3)C_(2)Tx composite film for fast and stable sodium storage.In this hybrid nano-architecture,the Sb_(2)S_(3)nanowires uniformly anchored between Ti_(3)C_(2)Tx nanosheets not only act as sodium storage reservoirs but also pillar the two-dimensional(2D)Ti_(3)C_(2)Tx to form three-dimensional(3D)channels benefiting for electrolyte penetration.Meanwhile,the highly conductive Ti_(3)C_(2)Tx nanosheets provide rapid electron transport pathways,confine the volume expansion of Sb_(2)S_(3)during sodiation,and restrain the dissolution of discharged sodium polysulfides through physical constraint and chemical absorption.Owing to the synergistic effects of the one-dimensional(1D)Sb_(2)S_(3)nanowires and 2D MXenes,the resultant composite anodes exhibit outstanding rate performance(553 mAh·g−1 at 2 A·g−1)and cycle stability in sodium-ion batteries.Moreover,the flexible SICs using Sb2S3/Ti_(3)C_(2)Tx anodes and active carbon/reduced graphene oxide(AC/rGO)paper cathodes deliver a superior energy and power density in comparison with previously reported devices,as well as an excellent cycling performance with a high capacity retention of 82.78%after 5,000 cycles.This work sheds light on the design of next-generation low-cost,flexible and fast-charging energy storage devices.