摘要
通过正交试验对Stellite6合金进行高速铣削加工,用极差、方差分析研究切削速度、轴向切深、径向切深和每齿进给量对切削力的影响。结果表明:在研究范围内,铣削参数对切削力的影响显著性由大到小为每齿进给量、轴向切深、径向切深、切削速度;以切削力最小为目标的最优切削参数组合为vc=100 m/min,fz=0.08 mm/z,ap=0.4 mm,ae=18 mm。
Highspeed milling experiments of Stellite 6 alloy was conducted by orthogonal experimental method.The effects of cutting speed,axial cutting depth,radial cutting depth and feed per tooth on cutting force were studied by range analysis and variance analysis.The results show that the influence of milling parameters on the cutting force orders as follows:Feed per tooth,axial cutting depth,radial cutting depth,cutting speed.The optimal cutting parameter for minimizing cutting force is vc=100 m/min,fz=0.08 mm/z,ap=0.4 mm and ae=18 mm.
作者
王威振
姜增辉
陈兴宽
左明秀
周超
WANG Weizhen;JIANG Zenghui;CHEN Xingkuan;ZUO Mingxiu;ZHOU Chao(School of Mechanical Engineering,Shenyang Ligong University,Shenyang 110159,China;Sichuan Nanshan Powder Actuated Fastening System Co.Ltd.,Yibin 644000,China)
出处
《兵器材料科学与工程》
CAS
CSCD
北大核心
2023年第3期129-133,共5页
Ordnance Material Science and Engineering
关键词
高速铣削
司太立合金
切削参数
切削力
正交试验
highspeed milling
stellite alloy
cutting parameters
cutting force
orthogonal experiment