摘要
利用化学镀Ni法在SiC陶瓷表面获得镀Ni层,借助SEM、XRD、XRF及热震循环实验等对镀Ni层的微观组织、物相组成及结合性能进行表征,重点研究了熔融Cu在相关基板上的润湿性能。结果表明,在镀液温度为65℃、pH值为9、施镀时间为30 min的条件下,SiC陶瓷表面镀Ni层最佳,能显著改善熔融Cu在SiC陶瓷基板上的润湿性。
Nickel coating was obtained on SiC ceramics surface via electroless nickel plating method,and the microstructure,phase composition and bondability of nickel coating were characterized by SEM,XRD,XRF and thermal shock cycling experiments.The wettability of molten copper on the relevant substrates was investigated as a focus.The results show that under the conditions of bath temperature at 65℃,pH at 9 and plating time at 30 min,the nickel coating on SiC ceramics surface is optimal and can dramatically improve the wettability of molten copper on SiC ceramics substrate.
作者
常佳琦
常庆明
李可
鲍思前
李亚伟
王庆虎
Chang Jiaqi;Chang Qingming;Li Ke;Bao Siqian;Li Yawei;Wang Qinghu(College of Materials Science and Metallurgical Engineering,Wuhan University of Science and Technology,Wuhan 430081,China;State Key Laboratory of Refractories and Metallurgy,Wuhan University of Science and Technology,Wuhan 430081,China)
出处
《武汉科技大学学报》
CAS
北大核心
2023年第3期186-192,共7页
Journal of Wuhan University of Science and Technology
基金
国家重点研发计划项目(2021YFB3800501).
关键词
化学镀NI
SIC陶瓷
熔融Cu
润湿性
electroless nickel plating
SiC ceramics
molten copper
wettability