摘要
采用原位聚合法制备了聚丁二酸丁二酯(PBS)/人造岗石废渣(AMWs)复合材料,研究了AMWs含量对PBS/AMWs复合材料结晶速率、负荷变形温度和力学性能的影响。结果表明:AMWs能够显著提升PBS的结晶速率和负荷变形温度;与纯PBS相比,加入约10%(w)AMWs的PBS/AMWs复合材料的结晶温度由67℃提升到79℃,负荷变形温度由60.4℃提升到70.4℃;加入刚性的AMWs并没有造成PBS断裂拉伸应变的显著下降,复合材料仍有较好的力学性能。
Polybutylene succinate(PBS)/artificial marble wastes(AMWs)composites were prepared by in-situ polymerization,and the influences of AMWs content on crystallization rate,load deformation temperature and mechanical properties of the composites were studied.The results show that AMWs can significantly increase the crystallization rate and load deformation temperature of PBS.The crystallization temperature of PBS/AMWs composites with the mass fraction of 10%of AMWs is increased from 67℃to 79℃,its load deformation temperature is increased from 60.4℃to 70.4℃.In addition,the addition of AMWs did not cause a significant decrease in the tensile strain at break of PBS,the composites still have good mechanical properties.
作者
李洋舟
冯天良
邓双
赵时福
陈珍明
方亮
Li Yangzhou;Feng Tianliang;Deng Shuang;Zhao Shifu;Chen Zhenming;Fang Liang(College of Materials Science and Engineering,Guilin University of Technology,Guilin 541000,China;Guangxi Key Laboratory of Calcium Carbonates Resources Comprehensive Utilization,Guangxi Zhuang Autonomous Region Calcium Resource Efficient and High-value Utilization Engineering Center,Hezhou 542800,China;College of Materials and Chemical Engineering,Hezhou University,Hezhou 542800,China)
出处
《合成树脂及塑料》
CAS
北大核心
2023年第3期6-10,16,共6页
China Synthetic Resin and Plastics
基金
广西壮族自治区自然科学基金(2018GXNSFAA281218,2019GXNSFAA245017)
广西壮族自治区科技重大专项(AA18242006,AA18242008)。
关键词
聚丁二酸丁二酯
人造岗石废渣
复合材料
负荷变形温度
力学性能
polybutylene succinate
artificial marble waste
composite
load deformation temperature
mechanical property
