Permeability evolution during pressure-controlled shear slip in saw-cut and natural granite fractures

Fluid injection into rock masses is involved during various subsurface engineering applications.However,elevated fluid pressure,induced by injection,can trigger shear slip(s)of pre-existing natural fractures,resulting in changes of the rock mass permeability and thus injectivity.However,the mechanism of slip-induced permeability variation,particularly when subjected to multiple slips,is still not fully understood.In this study,we performed laboratory experiments to investigate the fracture permeability evolution induced by shear slip in both saw-cut and natural fractures with rough surfaces.Our experiments show that compared to saw-cut fractures,natural fractures show much small effective stress when the slips induced by triggering fluid pressures,likely due to the much rougher surface of the natural fractures.For natural fractures,we observed that a critical shear displacement value in the relationship between permeability and accumulative shear displacement:the permeability of natural fractures initially increases,followed by a permeability decrease after the accumulative shear displacement reaches a critical shear displacement value.For the saw-cut fractures,there is no consistent change in the measured permeability versus the accumulative shear displacement,but the first slip event often induces the largest shear displacement and associated permeability changes.The produced gouge material suggests that rock surface damage occurs during multiple slips,although,unfortunately,our experiments did not allow quantitatively continuous monitoring of fracture surface property changes.Thus,we attribute the slip-induced permeability evolution to the interplay between permeability reductions,due to damages of fracture asperities,and permeability enhancements,caused by shear dilation,depending on the scale of the shear displacement.