期刊文献+

工业网关WiFi性能测试方法

Test Method for WiFi Performance of Industrial Gateway
下载PDF
导出
摘要 5G工业网关可作为连接5G基站与WiFi无线设备的桥梁,对其性能进行测试是保证系统稳定通信的关键。然而,当前对工业网关WiFi性能测试方法的研究较少。吞吐量是衡量WiFi性能的重要指标,针对吞吐量与覆盖距离、多用户并发吞吐量,分别设计单用户测试系统和多用户测试系统,研究测试方法并完成工业网关样品测试,最后对测试结果进行分析。所提出的测试方法采用程控衰减器控制衰减模拟增量距离,通过全电波暗室在实验室实现性能测试,测试环境可控性强、可重复性高,对数据接入类终端的WiFi性能测试具有借鉴意义。 5G industrial gateways can be used as a bridge connecting 5G base stations and WiFi wireless devices,and testing their performance,is the key to ensure stable communication of the system.However,there is currently less research into WiFi performance testing methods for industrial gateways.Throughput is an important index to measure WiFi performance.The single-user test system and multi-user test system are designed according to the throughput and coverage distance and multi-user concurrent throughput,then the industrial gateway is tested and the test results are analyzed.The test method proposed in this paper uses programmable attenuators to simulate incremental distance,and realizes the performance test in the laboratory through the anechoic chamber,which has the characteristics of high controllability and repeatability of the test environment,it can be used for reference to test the WiFi performance of data access terminals.
作者 王国奇 张黎 徐鹏飞 尚斌 林煜森 陈钼 WANG Guoqi;ZHANG Li;XU Pengfei;SHANG Bin;LIN Yusen;CHEN Mu(The Fifth Institute of Electronics,Ministry of Industry and Information Technology,Guangzhou 511370,China;Guangdong Provincial Key Laboratory of Electronic Information Products Reliability Technology,Guangzhou 511370,China)
出处 《电视技术》 2023年第4期194-198,共5页 Video Engineering
基金 工业和信息化部电子第五研究所专项基金项目(22Z19)。
关键词 工业网关 WIFI 性能测试 吞吐量 industrial gateway WiFi performance testing throughput
  • 相关文献

参考文献2

二级参考文献11

共引文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部