Mechanical behavior and semiempirical force model of aerospace aluminum alloy milling using nano biological lubricant

Aerospace aluminum alloy is the most used structural material for rockets,aircraft,spacecraft,and space stations.The deterioration of surface integrity of dry machining and the insufficient heat transfer capacity of minimal quantity lubrication have become the bottleneck of lubrication and heat dissipation of aerospace aluminum alloy.However,the excellent thermal conductivity and tribological properties of nanofluids are expected to fill this gap.The traditional milling force models are mainly based on empirical models and finite element simulations,which are insufficient to guide industrial manufacturing.In this study,the milling force of the integral end milling cutter is deduced by force analysis of the milling cutter element and numerical simulation.The instantaneous milling force model of the integral end milling cutter is established under the condition of dry and nanofluid minimal quantity lubrication(NMQL)based on the dual mechanism of the shear effect on the rake face of the milling cutter and the plow cutting effect on the flank surface.A single factor experiment is designed to introduce NMQL and the milling feed factor into the instantaneous milling force coefficient.The average absolute errors in the prediction of milling forces for the NMQL are 13.3%,2.3%,and 7.6%in the x-,y-,and z-direction,respectively.Compared with the milling forces obtained by dry milling,those by NMQL decrease by 21.4%,17.7%,and 18.5%in the x-,y-,and z-direction,respectively.